mrwigglezdj Posted September 22, 2006 Report Share Posted September 22, 2006 :'( well i was wangn on my way to work and around town today putn the heat to my subs, when all of a sudden my shit when into a solid 60hz burp when i was playn 504 boyz, i was like what the fuck, stoped and ran my ass to the back of the van poped open the door only to see a cloud of smoke comen from one of my amps....so i rip out the amp cusn and bitchn the whole time, i tear the thing down and it stinks like shit and i can only find 1 mosfet thats chared so none the less i need to find somewhere that sells mosfets, i need 8 that carry the model number 1RF3205 i say 8 because ill just replace them all to be safe, and one other question is would any mosfet work or does it have to be the same? i can get one at raido shack but its a diff model number and all that so i dont know if it will work or not Quote Americas loudest work van2006 iasca heavyweight bassboxing champion at 150.4 db with 60second average TL8 memphis PR15s,12 memphis PR6.5's coax,4 memphis PR 1inch tweets Link to comment Share on other sites More sharing options...
AP Zoutes Posted September 22, 2006 Report Share Posted September 22, 2006 sorry for your loss. I can't help but goodluck Quote Link to comment Share on other sites More sharing options...
marshallb Posted September 22, 2006 Report Share Posted September 22, 2006 Not positive but if you put the model # in a search engine. Should be able to get the specs. and look for a mosfet that is the same or better. Search result may also show you where to buy. Quote Link to comment Share on other sites More sharing options...
mrwigglezdj Posted September 22, 2006 Author Report Share Posted September 22, 2006 thanks, i thought my model number was 1rf3205 but i just did a online chat with a company and found out the model number is IRF3205 and they have them cheap so i bought 10 on the spot hope it works and i salvage my amp :'( Quote Americas loudest work van2006 iasca heavyweight bassboxing champion at 150.4 db with 60second average TL8 memphis PR15s,12 memphis PR6.5's coax,4 memphis PR 1inch tweets Link to comment Share on other sites More sharing options...
marshallb Posted September 22, 2006 Report Share Posted September 22, 2006 In that case good luck :^. Quote Link to comment Share on other sites More sharing options...
David Posted September 23, 2006 Report Share Posted September 23, 2006 I would look at the resistors too, My RF amp had a small one that popped to when it letgo, and I couldnt even tell by looking at it. Quote Link to comment Share on other sites More sharing options...
mrwigglezdj Posted September 23, 2006 Author Report Share Posted September 23, 2006 how do i test or tell the resitors are good or bad? Quote Americas loudest work van2006 iasca heavyweight bassboxing champion at 150.4 db with 60second average TL8 memphis PR15s,12 memphis PR6.5's coax,4 memphis PR 1inch tweets Link to comment Share on other sites More sharing options...
JordyO Posted September 25, 2006 Report Share Posted September 25, 2006 thanks, i thought my model number was 1rf3205 but i just did a online chat with a company and found out the model number is IRF3205 and they have them cheap so i bought 10 on the spot hope it works and i salvage my amp :'( Where was it you picked them up from? ... might need a couple myself :'( Quote Link to comment Share on other sites More sharing options...
mrwigglezdj Posted September 28, 2006 Author Report Share Posted September 28, 2006 digikey.com awsome place, didnt even have to pay upfront they do COD which is awsome, my mosfets should be in tommrow Quote Americas loudest work van2006 iasca heavyweight bassboxing champion at 150.4 db with 60second average TL8 memphis PR15s,12 memphis PR6.5's coax,4 memphis PR 1inch tweets Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.