Basshead08 Posted April 5, 2010 Report Share Posted April 5, 2010 That is basically a stock alt being sold as h/o. If all you're running is what is in your sig I think you'd be fine just upgrading all your wire to 1/0 and adding a good battery in the back close to the amps. System tear out has begun...Out with the old i have a iq of 128 i graduated at the top of my class tell me how im reatrded you are the 1 thats dumb as hell you can't even spell Look at the underlined text hahahahahahahaha I think of it as the virgin losing the virginity technique not just jumping in to it, and pounding away, but going at it slowly over time, to get to that full extreme Link to comment Share on other sites More sharing options...
imupabove Posted April 5, 2010 Author Report Share Posted April 5, 2010 That is basically a stock alt being sold as h/o. If all you're running is what is in your sig I think you'd be fine just upgrading all your wire to 1/0 and adding a good battery in the back close to the amps. thanks for the reply. yeah im planning on doing the big 3 in 0 gauge and run a 0 gauge from the battery to a distribution block. would it be a better idea if i replaced battery under hood with like a Kinetik and dont add any other batteries. iDA-X200/Clarion EQS746 RF T500-1bd (2) 12" RF HX's Kicker 350.4 Alpine & Polk Speakers Stock electrical Link to comment Share on other sites More sharing options...
Basshead08 Posted April 5, 2010 Report Share Posted April 5, 2010 I would add a battery in the back first. You can basically use it as a distrobution block. Then save up and replace the one under the hood later if needed System tear out has begun...Out with the old i have a iq of 128 i graduated at the top of my class tell me how im reatrded you are the 1 thats dumb as hell you can't even spell Look at the underlined text hahahahahahahaha I think of it as the virgin losing the virginity technique not just jumping in to it, and pounding away, but going at it slowly over time, to get to that full extreme Link to comment Share on other sites More sharing options...
imupabove Posted April 5, 2010 Author Report Share Posted April 5, 2010 I would add a battery in the back first. You can basically use it as a distrobution block. Then save up and replace the one under the hood later if needed would that cause stress on my alternator? its 70 amps. iDA-X200/Clarion EQS746 RF T500-1bd (2) 12" RF HX's Kicker 350.4 Alpine & Polk Speakers Stock electrical Link to comment Share on other sites More sharing options...
Basshead08 Posted April 5, 2010 Report Share Posted April 5, 2010 No I ran a 1500 watt system with similar electrical for about two years and never had a problem System tear out has begun...Out with the old i have a iq of 128 i graduated at the top of my class tell me how im reatrded you are the 1 thats dumb as hell you can't even spell Look at the underlined text hahahahahahahaha I think of it as the virgin losing the virginity technique not just jumping in to it, and pounding away, but going at it slowly over time, to get to that full extreme Link to comment Share on other sites More sharing options...
imupabove Posted April 5, 2010 Author Report Share Posted April 5, 2010 No I ran a 1500 watt system with similar electrical for about two years and never had a problem how does this sound... big 3 in 0 gauge, run a 0 gauge from batt. to distro. block, and add a hc600 or hc800. iDA-X200/Clarion EQS746 RF T500-1bd (2) 12" RF HX's Kicker 350.4 Alpine & Polk Speakers Stock electrical Link to comment Share on other sites More sharing options...
Basshead08 Posted April 5, 2010 Report Share Posted April 5, 2010 Sounds good you can use the batt as a distro block System tear out has begun...Out with the old i have a iq of 128 i graduated at the top of my class tell me how im reatrded you are the 1 thats dumb as hell you can't even spell Look at the underlined text hahahahahahahaha I think of it as the virgin losing the virginity technique not just jumping in to it, and pounding away, but going at it slowly over time, to get to that full extreme Link to comment Share on other sites More sharing options...
imupabove Posted April 5, 2010 Author Report Share Posted April 5, 2010 Sounds good you can use the batt as a distro block oh yea cool cool. just wondering you mind tell me what did you 1500 watt system consisted of please? iDA-X200/Clarion EQS746 RF T500-1bd (2) 12" RF HX's Kicker 350.4 Alpine & Polk Speakers Stock electrical Link to comment Share on other sites More sharing options...
Basshead08 Posted April 5, 2010 Report Share Posted April 5, 2010 1998 Ford ranger stock alt w/o power windows or locks Kicker SX1250.1 Birthsheet said 1470ish watts rms Two kicker L5 15's xstatic batcap 800 in the back Big 3 in 1/0 1 run of 1/0 from front battery to the batcap Batcap grounded to the frame System tear out has begun...Out with the old i have a iq of 128 i graduated at the top of my class tell me how im reatrded you are the 1 thats dumb as hell you can't even spell Look at the underlined text hahahahahahahaha I think of it as the virgin losing the virginity technique not just jumping in to it, and pounding away, but going at it slowly over time, to get to that full extreme Link to comment Share on other sites More sharing options...
imupabove Posted April 5, 2010 Author Report Share Posted April 5, 2010 nice. but see those ford trucks got beefy ass alts. mostly american cars got beefy alts. but ill look forward on it though. iDA-X200/Clarion EQS746 RF T500-1bd (2) 12" RF HX's Kicker 350.4 Alpine & Polk Speakers Stock electrical Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.