Jump to content

B&C 6PEV13 6.5 Mids and B&C DE35 Bullet Tweeter


Recommended Posts

Hey guys I decided to run (2) B&C 6PEV13 6.5 Mids and (2) B&C DE35 Bullet Tweeter in each front door. I plan on purchasing a active Headunit to tune the system. Can anyone tell me what range or xo point I should run to these speakers? Also I need to purchase an amp for these speakers would someone please recommend an amp as well to power this.

Thanks

B&C 6PEV13 SPECS

Nominal Diameter 170 mm (6.5 in.)

Nominal Impedance 8 Ω

Minumum Impedance 6 Ω

Power Handling

(300-3000 Hz)

Nominal1 120 W

Continuous Program2 240 W

Sensitivity (1W/1m)3 99 dB

Frequency Range 150-8000 Hz

Voice Coil Diameter 38 mm (1.5 in)

Winding Material Aluminium

Former Material Fiber Glass

Winding Depth 7 mm (9/32 in)

Magnetic Gap Depth 6 mm (1/4 in)

Flux Density 1.4 T

Thiele & Small Parameters4

Fs 126 Hz

Re 5.2 Ω

Qes 0.39

Qms 4.6

Qts 0.36

Vas 6 dm3 (0.21 ft3)

Sd 132 cm2 (20.5 in2)

η0 3%

X max ± 0.6 mm

X var ± 1.5 mm

Mms 6 g

Bl 8.2 T·m

Le 0.6 mH

B&C DE35 SPECS

Nominal Impedance 8 ohm

Minimum Impedance 7 ohm

Nominal Power Handling (1) 25 W

Continuous Power Handling (2) 50 W

Sensitivity (1W/1m) (3) 108 dB

Frequency Range 3.5 -18 kHz

Recommended Crossover (4) 5 kHz

Voice Coil Diameter 32 mm (1.25 in)

Winding Material Aluminium

Inductance 0.1 mH

Diaphragm Material Mylar

Flux Density 1.3 T

Link to comment
Share on other sites

  • 2 months later...

Hey guys I decided to run (2) B&C 6PEV13 6.5 Mids and (2) B&C DE35 Bullet Tweeter in each front door. I plan on purchasing a active Headunit to tune the system. Can anyone tell me what range or xo point I should run to these speakers? Also I need to purchase an amp for these speakers would someone please recommend an amp as well to power this.

Thanks

B&C 6PEV13 SPECS

Nominal Diameter 170 mm (6.5 in.)

Nominal Impedance 8 Ω

Minumum Impedance 6 Ω

Power Handling

(300-3000 Hz)

Nominal1 120 W

Continuous Program2 240 W

Sensitivity (1W/1m)3 99 dB

Frequency Range 150-8000 Hz

Voice Coil Diameter 38 mm (1.5 in)

Winding Material Aluminium

Former Material Fiber Glass

Winding Depth 7 mm (9/32 in)

Magnetic Gap Depth 6 mm (1/4 in)

Flux Density 1.4 T

Thiele & Small Parameters4

Fs 126 Hz

Re 5.2 Ω

Qes 0.39

Qms 4.6

Qts 0.36

Vas 6 dm3 (0.21 ft3)

Sd 132 cm2 (20.5 in2)

η0 3%

X max ± 0.6 mm

X var ± 1.5 mm

Mms 6 g

Bl 8.2 T·m

Le 0.6 mH

B&C DE35 SPECS

Nominal Impedance 8 ohm

Minimum Impedance 7 ohm

Nominal Power Handling (1) 25 W

Continuous Power Handling (2) 50 W

Sensitivity (1W/1m) (3) 108 dB

Frequency Range 3.5 -18 kHz

Recommended Crossover (4) 5 kHz

Voice Coil Diameter 32 mm (1.25 in)

Winding Material Aluminium

Inductance 0.1 mH

Diaphragm Material Mylar

Flux Density 1.3 T

Id go with somthing quality for a amp iv always had good luck with Old school rockfords and eclipse is a decent amp depending on your budget for a little cheaper the new hifonics amps are ok go with sumthing 400X2 or 600X2 run your 6.5 and horn togather + to + and - to - soo it will run at 4 ohms u can even run another horn in there or another 8 ohm speaker to drop it to 2 ohms... but a decent crossover for the horns!! u can check with parts express tech support n they will recomend one for u

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 242 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...