Jump to content
Sundown Audio

Sundown Audio SAZ3000 can i run it at .5 ohms?


Recommended Posts

Just like the topic says, can i run this amp at .5 ohms off of a DC 270xp, D3400 and 2 D975's safely?

Build in progress:

Kenwood DNX890HD

Rockford Fosgate White wolf RCA's

2 Rockford Fosgate T400.4 on RF fanatic q components (6.5 in the kick, 6.5 in the front doors, 5.25 in rear doors)
2 Rockford Fosgate T2500's on sub

1 Fi car audio Team 15 D1

XS Power D3400 and three D975's in the rear

Mechman Elite 370

Stinger power connections and cable

RockFord_Fosgate-1-1.png

Link to comment
Share on other sites

i know its rated at 3k rms at 1 ohm and that is usually under rated, but what kind of power is it putting down approx at 1 ohm and .5?

Edited by Symmetry9898

Build in progress:

Kenwood DNX890HD

Rockford Fosgate White wolf RCA's

2 Rockford Fosgate T400.4 on RF fanatic q components (6.5 in the kick, 6.5 in the front doors, 5.25 in rear doors)
2 Rockford Fosgate T2500's on sub

1 Fi car audio Team 15 D1

XS Power D3400 and three D975's in the rear

Mechman Elite 370

Stinger power connections and cable

RockFord_Fosgate-1-1.png

Link to comment
Share on other sites

i agree :good:

i think there is a sticky here with testing on the 3k.

Edited by skittlesRgood

If I answered you in a well mannered, informative way, you asked a good question or had a good attitude. If I was an asshole, you asked a stupid question or you had a fucktard attitude... or I was in a bad mood.

Team BassickHU: Pioneer AVIC Z110Front: Peerless SLS 6.5", Peerless HDS 4", Rainbow tweeter - running activeAmp: JL HD600/4 and DC 4 channel (bridged to midbass)Processor: JBL MS-8Subs: 2x 12" AA MayhemsAmp: DC 3kElectrical: DC power 270xp alt. 1/0 big 4. XSpower D3400 and six D680s.

http://www.stevemeadedesigns.com/board/topic/121795-29-update-the-buick-is-getting-a-rebuild/

Top career scores: DBdrag 151.7 MECA SQ 82.25My SOTM build

Yeah. im pretty sure they dont warranty retarded people.

Link to comment
Share on other sites

i agree :good:

i think there is a sticky here with testing on the 3k.

shit, my bad, I fail at SMD

Build in progress:

Kenwood DNX890HD

Rockford Fosgate White wolf RCA's

2 Rockford Fosgate T400.4 on RF fanatic q components (6.5 in the kick, 6.5 in the front doors, 5.25 in rear doors)
2 Rockford Fosgate T2500's on sub

1 Fi car audio Team 15 D1

XS Power D3400 and three D975's in the rear

Mechman Elite 370

Stinger power connections and cable

RockFord_Fosgate-1-1.png

Link to comment
Share on other sites

When I had my SAZ3000 @ .5 I was getting about 3700 out of it. Now this was at short burst.. IE BURPS....

But as mentioned already really really watch your voltage and clipping....

Head Unit: Alpine CDA 9887

Sub Amps: 4 RF2500's

Subs: 8 SA-12's Walled

Comp Amp: 1 RF600.2 (for now)

Comps: (4) 6.5 Punch Mid Pros and 2 Punch Pro Tweeters

Batteries: (1) XS D5100 (5) D3100

Power Cables: 2 runs of 2/0 power and ground each front to back(Try-Star)

Alternator: Dual Mechman Rhino 250's

Deadener: Fatmat / Damplifier Pro

Link to comment
Share on other sites

Also remember that you void warranty at anything under 1 ohm..

Daily Driver 1999 Kia Sephia

Kenwood DNX-893s
Audison Bit One Processor
2 Dat 4.125's
Sundown Audio SCV-6k
Hertz hsk-165xl's Mids running active                                                                                                                                                                                                                                                                               Focal V30 Series Tweeters running active 
Sundown Sa-8 v1's in the doors
2 Sundown Zv5 12's 
Lots of Hushmat
Big 3+ and 3 + & 3- runs of Trystar 2/0
2 Dc Power Engineering 320 HP Alts

2017 Comp Vehicle
2006 Toyota 4 Runner
Kenwood Excelon DNX-893s                                                                                                                                                                                                                                                                                         Audison Bit One HD DSP
4 Sundown Sa 6.5v2 Component Sets 
Focal Access 6.5 2 ways
Sundown Audio Sax-50.4                                                                                                                                                                                                                                                                                       Sundown Audio Sax-100.4
2 Dc Power 370xp
Northstar agm27f
Northstar agm65
2 Northstar asmagm 480's
2 Dual 1 Sundown Nightshade v3 12's
2 Sundown SCV-7500's
All SMD Fuse Holders
Shitload Of Sundown 1/0

120 sq ft Second Skin Damp Pro

No, Its Not A Burp Truck!!!!

2016 Season 3rd place in Xtreme 1 At Finals

2016 Season 6th Place In Kaos 1 At Finals ( Blew The Subs Up In First Round Eliminations)

2 Kansas State Records Set In 2016 In Xtreme 1 And Kaos 1 In Midwest SPL

2-1.jpgsa.jpg
DCPowerLogoTransparent2.png

David said:

audio is a lifestyle, not a hobby

newls1
I cant read a tape to save my life... 1/2's are ok, but other marks confuse me
kingsuv
only men who cant read a tape, take it in the ass
kingsuv
you sir, get a pink hard hat on jobsites

Link to comment
Share on other sites

I would say yes you can run it, but i would advise not to unless you keep the gain at a moderate level. however, i do admit that i don't have alot of experience (beside what i see on this forum) with that DC 270xp... so if its as good as it sounds you may actually be ok. just get a 3100 and be done with it imo

CURRENTLY UNDER RE-CONSTRUCTION

2008 Hyundai Sonata

Team T3 Audio

Team Deadly Hertz

Team SMD (Street Motivated Devastation)

Chariot.gif

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 214 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...