evermaxx Posted July 24, 2010 Report Share Posted July 24, 2010 Okay well I have 2 12" RW P1 subs (They Only Have 1 set of terminal's per speaker) Prefab box (Dont Bash Me!) I also have an Eclipse 33250 Permiem AMP I was wondering how I could do this so it doesnt blow the speakers. The subs are rated at 150w (RMS) 300w (MAX) I cant find a site with specs on the amp, but I know its a 620.2 So is there any way I can hook these both up? BTW its going in my step moms van w/ Alpine HU Quote Team Subsonic Lows Get your garbage EMF products of my amp bitch Man....it makes a nice work bench Link to comment Share on other sites More sharing options...
tehbert0 Posted July 24, 2010 Report Share Posted July 24, 2010 are they d2 or d4 Quote http://motorcitydesignsaudio.com Link to comment Share on other sites More sharing options...
Beanz Posted July 24, 2010 Report Share Posted July 24, 2010 They gotta be single 4 if they only have one terminal or they could be single 8 ohms. nah you wont blow them just dont turn the gain up too much Quote That's why they don't deliver. Yer ass better go sit along the side of the road and wait. You can't expect them to travel up some dirt road in a hick / back woods town. Thats how horror movies start I explain things very simply and use analogies in terms of Pickles, and grape drink, pool noodles and jackhammers...if you can't put 2 and 2 together there man, There simply is not much more I can do. Link to comment Share on other sites More sharing options...
evermaxx Posted July 24, 2010 Author Report Share Posted July 24, 2010 Yeah only 1 set red/black into red/black on the box. Imm take it out the box right now and see what they are. Quote Team Subsonic Lows Get your garbage EMF products of my amp bitch Man....it makes a nice work bench Link to comment Share on other sites More sharing options...
evermaxx Posted July 24, 2010 Author Report Share Posted July 24, 2010 They are P112S4 4OHM Quote Team Subsonic Lows Get your garbage EMF products of my amp bitch Man....it makes a nice work bench Link to comment Share on other sites More sharing options...
wL<3bass Posted July 24, 2010 Report Share Posted July 24, 2010 You'll blow 'em solely because your brool wasn't story enough co Quote Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references... Link to comment Share on other sites More sharing options...
evermaxx Posted July 24, 2010 Author Report Share Posted July 24, 2010 You'll blow 'em solely because your brool wasn't story enough co AWHHH NIGGA AWHHH But yeah, will it blow em? Quote Team Subsonic Lows Get your garbage EMF products of my amp bitch Man....it makes a nice work bench Link to comment Share on other sites More sharing options...
Beanz Posted July 24, 2010 Report Share Posted July 24, 2010 nah they'll be at a 4 ohm load so no like i said before though just dont get too crazy with the gains Quote That's why they don't deliver. Yer ass better go sit along the side of the road and wait. You can't expect them to travel up some dirt road in a hick / back woods town. Thats how horror movies start I explain things very simply and use analogies in terms of Pickles, and grape drink, pool noodles and jackhammers...if you can't put 2 and 2 together there man, There simply is not much more I can do. Link to comment Share on other sites More sharing options...
evermaxx Posted July 24, 2010 Author Report Share Posted July 24, 2010 (edited) Thanks everyone Edited July 24, 2010 by evermaxx Quote Team Subsonic Lows Get your garbage EMF products of my amp bitch Man....it makes a nice work bench Link to comment Share on other sites More sharing options...
King Zick Posted July 24, 2010 Report Share Posted July 24, 2010 Wow. Quote The King. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.