Jump to content
Sonic Electronix

Will this work? Or Just Blow My POS Subs?


Recommended Posts

Okay well I have 2 12" RW P1 subs (They Only Have 1 set of terminal's per speaker)

Prefab box (Dont Bash Me!)

I also have an Eclipse 33250 Permiem AMP

I was wondering how I could do this so it doesnt blow the speakers.

The subs are rated at 150w (RMS) 300w (MAX)

I cant find a site with specs on the amp, but I know its a 620.2

So is there any way I can hook these both up?

BTW its going in my step moms van :D w/ Alpine HU

33y2914.jpg

Team Subsonic Lows


Get your garbage EMF products of my amp bitch


Man....it makes a nice work bench ;)

Link to comment
Share on other sites

They gotta be single 4 if they only have one terminal or they could be single 8 ohms.

nah you wont blow them just dont turn the gain up too much

That's why they don't deliver.

Yer ass better go sit along the side of the road and wait.

You can't expect them to travel up some dirt road in a hick / back woods town. Thats how horror movies start :D

I explain things very simply and use analogies in terms of Pickles, and grape drink, pool noodles and jackhammers...if you can't put 2 and 2 together there man, There simply is not much more I can do.

Link to comment
Share on other sites

You'll blow 'em solely because your brool wasn't story enough co 8)

Vehicle: 1997 S10 Blazer 4dr 4X4

Exterior: Rear End Bagged, Black Grill, Lifted 2"

Amplifiers: Rockford Fosgate T8004 & T10001bd

Batteries: 2 Stinger SPV35, Kinetik HC2400

Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v

Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube)

Headunit: Eclipse CD3200 w/ 80G iPod

Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors)

Subwoofers: 1 15" Fi BL Fully Loaded

Wire: All 1/0g Kicker Hyperflex

My YouTube Videos

My Fiberglass A-Pillar Build

My "Seamless" Looking Box Build

My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer)

My Stealth 8" Fiberglass Build (for '05 TrailBlazer)

My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk

My feedback/references...

Link to comment
Share on other sites

nah they'll be at a 4 ohm load so no like i said before though just dont get too crazy with the gains

That's why they don't deliver.

Yer ass better go sit along the side of the road and wait.

You can't expect them to travel up some dirt road in a hick / back woods town. Thats how horror movies start :D

I explain things very simply and use analogies in terms of Pickles, and grape drink, pool noodles and jackhammers...if you can't put 2 and 2 together there man, There simply is not much more I can do.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 262 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...