corteznewbie Posted August 6, 2010 Report Share Posted August 6, 2010 so what is the proper way to burp a system? Quote Team DBs (Driven By sound) Link to comment Share on other sites More sharing options...
OldsBoomer Posted August 6, 2010 Report Share Posted August 6, 2010 so what is the proper way to burp a system? set the gains properly and find your peak frequency. Find a Test tone for that Hz thats about 30sec, play it starting at a low volume. Then roll into it(turning up the volume or gains knob). You just burp your system Quote Suburban Coming Soon Link to comment Share on other sites More sharing options...
TeejayBee Posted August 6, 2010 Report Share Posted August 6, 2010 Just do what i do since my subs peak at 50 hz ill do a three second burp of 49 hz then three seconds of 50 and three seconds of 51. all ya need todo Quote Link to comment Share on other sites More sharing options...
OldsBoomer Posted August 6, 2010 Report Share Posted August 6, 2010 Just do what i do since my subs peak at 50 hz ill do a three second burp of 49 hz then three seconds of 50 and three seconds of 51. all ya need todo your subs do not peak at 50hz. 50hz is where your vehicle peaks with your current setup Quote Suburban Coming Soon Link to comment Share on other sites More sharing options...
TeejayBee Posted August 6, 2010 Report Share Posted August 6, 2010 same thing lmao Quote Link to comment Share on other sites More sharing options...
OldsBoomer Posted August 6, 2010 Report Share Posted August 6, 2010 same thing lmao not really man subs dont peak your box and vehicle do Quote Suburban Coming Soon Link to comment Share on other sites More sharing options...
fox_racin4 Posted August 6, 2010 Report Share Posted August 6, 2010 put on the tone you peak at pause it turn volume up to where you need it unpause let play for 3 seconds then pause again Quote 1998 gmc extd cab 12 crossfire C710s 4 SAZ-4500s 3 Singer 400A altsbuncha mids/highs Team Asshole Link to comment Share on other sites More sharing options...
corteznewbie Posted August 6, 2010 Author Report Share Posted August 6, 2010 reason i asked is my subs say they will handle 2400watts during burps but 1200 rms Quote Team DBs (Driven By sound) Link to comment Share on other sites More sharing options...
MarioB Posted August 6, 2010 Report Share Posted August 6, 2010 so what is it exactly when you burp your subs? my car peaks at 50hz Quote 12- DC Audio m2Lvl3 12's1- Hertz HSK3 way2- DC5K's2- ZX350.42- Stinger SP1500D batteries in rear3- runs of 1/0ga. to the rearTeam DC Audiodcsoundlab.com Quality is all in how you take pictures I have plenty of projects that look WAY better on camera then in person crazy to fit so many in so little. Reminds me of some of the porns I've seen? Link to comment Share on other sites More sharing options...
andym85 Posted August 6, 2010 Report Share Posted August 6, 2010 so what is it exactly when you burp your subs? my car peaks at 50hz a burp is just playing a test tone for a few seconds... i usually turn off all my highs open up all the filters on the amp (not the gain) do a sweep at moderate volume to find ur peak note then roll into a burp at that note... Quote i likes me some audio stuff... Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.