Jump to content

Trending

  1. 2017 Ford F250 - B2 Audio 3 Ways in the doors! Custom 6x9 Adapters, Class A Amp Wired & Fired up  


    Installations - Started by ,

    visit: http://www.stevemeadedesigns.com/board - Join our fun, friendly and knowledgeable community today! 
    Get Second Skin’s #1 Sound Deadener here  
    http://www.secondskinaudio.com
    SMD Products can be found at http://www.wcCarAudio.com , Amazon, Ebay and more!

    I know it has been a while but i finally got the doors started...and finished.  The system consists of:
    Factory Headunit (Sony)
    Pac AmpPro AP4-FD21 Interface (Using optical output)
    Audiocontrol DM810 DSP (way more than i need now but expandable for later!)
    B2 Audio Reference 4 Channel (Class A or AB (Switchable)) on the Mids/Highs
    B2 Audio Rage 2500.1 on the Subwoofers
    B2 Audio Reference 6.3 Three-Way Components (Custom Starboard HDPE Adapter Plates)
    (6) B2 Audio 6.5" Subwoofers in a Gately Audio ported, under seat enclosure.
    SMD Quick Release Neo Magnet Terminal (to take box out at night or when space is needed)
    SMD Fuses, Fuse Blocks and Power Distritubion
    Skyhigh Power Cable
    SMD RCA (From DM810 to amps)
    NavTV FD 360 Camera Control 
    Second Skin "Damp Pro" sound Deadener
    Wiring harness used Pac APH-FD01 (to get into the doors). 

     I pulled my boot and door plug out to try to find a way in through the molex plug like i normally would...but there isn't room for ANYTHING.  I think because my truck is fully loaded all the contact points are being used.  When i go fully active SOON, i will drill the necessary holes and run new wires. For now, this works GREAT!
    I know this was a long video, but if you watched it all, thank you!  I will make a video soon doing some basic tuning to get this thing souding even better! I also have a BRAND NEW improved Gately Audio under-seat box i am going to swap in.  The one i have now is a prototype, one of the originals and he has since improved them.  I have it at the shop ready to go! And then, i am going to put 4 8" subs in another under-seat box after that! I have plans in the future to expand the system that is why i used the Audiocontrol DM810 DSP.  It has way more channels than i need right now but i would rather have too many than not enough! And YES, i will probably eventually switch to fully active.  Right now, i just wanted it all working and sounding good..and it doesn't just sound good, it sounds GREAT. And it's still flat! I can't wait to throw some pink noise in it and an RTA! Stay tuned! And make sure you hit the notification button, i have lots of fun stuff for 2020 planned!
    #Ford #B2Audio #Speakers
    Support these videos here! http://www.patreon.com/meade916
    Also, check out my other pages:
    Instagram: http://www.instagram.com/meade916
    Facebook Page here:
    https://www.facebook.com/SMD-Steve-Me...
    Follow: http://www.twitter.com/meade916
    Visit Sonic Electronix at http://www.sonicelectronix.com
  2. SMD Terminal X Premium High Power, Leak Proof Speaker Box Terminal Cup (Copper or Aluminum)  


    Installations - Started by ,

    Just some more fun stuff we are making here at the shop.  I love my job.  Car audio products from a person that understands and loves car audio.  How can you go wrong?
  3. I Got an $8400 Christmas Gift! D'Amore Engineering 1500.4 Dual Stereoblock Hi-Res Amplifier  


    Installations - Started by ,

    visit: http://www.stevemeadedesigns.com/board - Join our fun, friendly and knowledgeable community today! 
    SMD Products can be found at http://www.wcCarAudio.com , http://www.sonicelectronix.com, Amazon, Ebay and more!
    #Damore #engineering #Amplifier
    Next video, i will DYNO this amp and then open it up. If you want to see the guts, hit like and say so! this amp is TRULY a masterpiece inside and out!  Turn your notifications on!
    YOUTUBE WILL NOT ALLOW ME TO USE ANGLE BRACKETS IN THE DESCRIPTION SO I CAN'T PASTE ALL THE DATA. FOR MORE INFO INCLUDING THE FULL PDF SPEC-SHEET VISIT: https://damore-engineering.myshopify....
    The A1500.4 is a True Dual Stereo Design providing better stereo separation and imaging as compared to traditional stereo amplifiers - the chassis being the only thing common between channels. In an effort to provide the very best signal to noise ratio and lowest distortion possible, 109 dB (A-weighted) and 0.027% THD+N the amplifier utilizes a Mirror Image Design with positive and negative output signals of each channel generated using identically mirrored circuitry. Each of the two channels is also a mirror image of the other. A1500.4 operates the current amplifier devices in class A/B operation and the voltage amplifier devices in pure balanced Class A mode offering a realism and truth to the source never before available from a mobile power amplifier.
    From a design standpoint, the A1500.4 utilizes separate PCBs for the voltage amplification stage (and each of the 4 channels has its own) and current amplification stage to maximize the signal to noise ratio so that it's dead silent. It has been designed from the ground up around the highest quality components available at any cost, including; Nichicon Fine Gold™ capacitors, Nichicon Muse™ audio capacitors, (8) On-Semiconductor complementary bipolar junction transistors per channel, and non-inductive resistors, all assembled on 4-layer heavy copper PCBs! Its dual stereo channels can be wired as two single channels with double the output voltage for applications where high power is required. Finally, it includes two pair of gorgeous LED output meters to indicate actual amplifier power for each of the 4 channels as well being used for self diagnostics during a fault condition.
    FOR CONTINUED SPEC SHEET VISIT: https://damore-engineering.myshopify....
    Get Second Skin’s #1 Sound Deadener here  
    http://www.secondskinaudio.com
    Support these videos here! http://www.patreon.com/meade916
    Also, check out my other pages:
    Instagram: http://www.instagram.com/meade916
    Facebook Page here:
    https://www.facebook.com/SMD-Steve-Me...
    Follow: http://www.twitter.com/meade916
    Visit Sonic Electronix at http://www.sonicelectronix.com
  4. Help me identify this subwoofer please! pics in post.  


    Bass Demo's - Started by ,

    Anyone able to identify the brand of this subwoofer? Cone cap on it and I have no idea. Guy said it was a 4000w. Another buddy said that he thought he knew but wasn't sure. The 2400.1 d Zues bangs the shit outta it but my question is before I upgrade to a bigger amp I would like to know exactly what its rated at. It bangs in my mountianeer! I'm wanting to get at least 1 more them or 3. Gotta start somewhere aye.


  5. The Hot Seat! 75,000 WATTS! 6 15" DC Audio Neo Elite Subs 4th Order Bandpass Wall Chevy Colorado  


    Bass Demo's - Started by ,

    visit: http://www.stevemeadedesigns.com/board - Join our fun, friendly and knowledgeable community today! 
    Get Second Skin’s #1 Sound Deadener here  
    http://www.secondskinaudio.com
    SMD Products can be found at http://www.wcCarAudio.com , Amazon, Ebay and more!
    This was an AWESOME bass Demo! I have more intense demo's coming from my day at the SkyHigh BBQ and Bass Meet April 2019! Subscribe for more! Thanks for watching if you did!
    #skyhighcaraudio #dcaudio #limitlesslithium
    Support these videos here! http://www.patreon.com/meade916
    Also, check out my other pages:
    Instagram: http://www.instagram.com/meade916
    Facebook Page here:
    https://www.facebook.com/SMD-Steve-Me...
    Follow: http://www.twitter.com/meade916
    Visit Sonic Electronix at http://www.sonicelectronix.com
  6. 2-ALPINE TYPE-XW10D4 (900 WATT RMS) electrical upgrades. Nothing tuned and almost all settings f lo at, as low as it gets  


    Bass Demo's - Started by ,

    Brand New Skar Rp-2000.1 amp @ 1 ohm wwith OFC wire, big 3, electrical upgrades, 2 batteries
  7. Shaun's Epic Audio Legion & Kawasaki Teryx Build by Rob's Customs in Apopka, FL  


    Build Series - Started by ,

    This Kawasaki Teryx was built for Shaun by Rob's Customs in Apopka, FL. The build incorporates 8 x  Audio Legion MR6N (6.5" Neodymium Marine Grade Coaxial) and 4 x Audio Legion MR8N (8" Neodymium Marine Coaxial). These guys really out did themselves with a one of a kind build, that isn't afraid to get down in the mud.


What's New

  1. Over 8 Feet of Screen😳Sony Bravia XR 98" X90L 4k TV Unboxed, Wall Mounted and Demo'd - It's HUGE!  


    Meade916 Youtube Video's - Started by ,

    Over 8 Feet of Screen😳Sony Bravia XR 98" X90L 4k TV Unboxed, Wall Mounted and Demo'd - It's HUGE!
  2. A Custom High Output Alternator for Shaq’s Dodge TRX! Mechman Elite Series⚡️laser engraved  


    Meade916 Youtube Video's - Started by ,

    A Custom High Output Alternator for Shaq’s Dodge TRX! Mechman Elite Series⚡️laser engraved
  3. Triple Shelf Steel Plate Amp Rack - 8500 watts⚡️pt.2 Welded together & test fit | GMC Yukon System 🔊  


    Meade916 Youtube Video's - Started by ,

    Triple Shelf Steel Plate Amp Rack - 8500 watts⚡️pt.2 Welded together & test fit | GMC Yukon System 🔊
  4. Triple Shelf Steel Plate Amp Rack - 8500+ watts⚡️pt.1 Designed & Laser cut | GMC Yukon Sound System  


    Meade916 Youtube Video's - Started by ,

    Triple Shelf Steel Plate Amp Rack - 8500+ watts⚡️pt.1 Designed & Laser cut | GMC Yukon Sound System
  5. Insane Excursion😳Pushing a cheap sub 🔊 to the absolute max⚡️trying to send it  


    Meade916 Youtube Video's - Started by ,

    Insane Excursion😳Pushing a cheap sub 🔊 to the absolute max⚡️trying to send it
  6. New 370 Amp⚡️ Mechman Elite Series high output alternator solves annoying #ford belt wrap issues!  


    Meade916 Youtube Video's - Started by ,

    New 370 Amp⚡️ Mechman Elite Series high output alternator solves annoying #ford belt wrap issues!
  7. Basshead for life 🔊 I had to 😂  


    Meade916 Youtube Video's - Started by ,

    Basshead for life 🔊 I had to 😂
  8. Jurassic T-Rex BASS 🔊 Crazy Home Theater System With 2 33" Subs Stomping the House Down😳  


    Meade916 Youtube Video's - Started by ,

    Jurassic T-Rex BASS 🔊 Crazy Home Theater System With 2 33" Subs Stomping the House Down😳

Featured

  1. 2017 Ford F250 - B2 Audio 3 Ways in the doors! Custom 6x9 Adapters, Class A Amp Wired & Fired up  


    Installations - Started by ,

    visit: http://www.stevemeadedesigns.com/board - Join our fun, friendly and knowledgeable community today! 
    Get Second Skin’s #1 Sound Deadener here  
    http://www.secondskinaudio.com
    SMD Products can be found at http://www.wcCarAudio.com , Amazon, Ebay and more!

    I know it has been a while but i finally got the doors started...and finished.  The system consists of:
    Factory Headunit (Sony)
    Pac AmpPro AP4-FD21 Interface (Using optical output)
    Audiocontrol DM810 DSP (way more than i need now but expandable for later!)
    B2 Audio Reference 4 Channel (Class A or AB (Switchable)) on the Mids/Highs
    B2 Audio Rage 2500.1 on the Subwoofers
    B2 Audio Reference 6.3 Three-Way Components (Custom Starboard HDPE Adapter Plates)
    (6) B2 Audio 6.5" Subwoofers in a Gately Audio ported, under seat enclosure.
    SMD Quick Release Neo Magnet Terminal (to take box out at night or when space is needed)
    SMD Fuses, Fuse Blocks and Power Distritubion
    Skyhigh Power Cable
    SMD RCA (From DM810 to amps)
    NavTV FD 360 Camera Control 
    Second Skin "Damp Pro" sound Deadener
    Wiring harness used Pac APH-FD01 (to get into the doors). 

     I pulled my boot and door plug out to try to find a way in through the molex plug like i normally would...but there isn't room for ANYTHING.  I think because my truck is fully loaded all the contact points are being used.  When i go fully active SOON, i will drill the necessary holes and run new wires. For now, this works GREAT!
    I know this was a long video, but if you watched it all, thank you!  I will make a video soon doing some basic tuning to get this thing souding even better! I also have a BRAND NEW improved Gately Audio under-seat box i am going to swap in.  The one i have now is a prototype, one of the originals and he has since improved them.  I have it at the shop ready to go! And then, i am going to put 4 8" subs in another under-seat box after that! I have plans in the future to expand the system that is why i used the Audiocontrol DM810 DSP.  It has way more channels than i need right now but i would rather have too many than not enough! And YES, i will probably eventually switch to fully active.  Right now, i just wanted it all working and sounding good..and it doesn't just sound good, it sounds GREAT. And it's still flat! I can't wait to throw some pink noise in it and an RTA! Stay tuned! And make sure you hit the notification button, i have lots of fun stuff for 2020 planned!
    #Ford #B2Audio #Speakers
    Support these videos here! http://www.patreon.com/meade916
    Also, check out my other pages:
    Instagram: http://www.instagram.com/meade916
    Facebook Page here:
    https://www.facebook.com/SMD-Steve-Me...
    Follow: http://www.twitter.com/meade916
    Visit Sonic Electronix at http://www.sonicelectronix.com
  2. It's All in the Box. 2 18" Subs + "Compound Tapped Horn" Enclosure = LOUD CLEAN BASS!  


    Bass Demo's - Started by ,

    Visit my site! Join the forum! http://www.SMDmedia.net
    We shot the entire day LIVE on youtube! check out the previous video's to get an idea what it was like to be there. 
    thanks for watching!

    Also, check out my other pages:
    Instagram: http://www.instagram.com/meade916
    Facebook Page here:
    https://www.facebook.com/SMD-Steve-Me...
    Follow: http://www.twitter.com/meade916
    Visit SMD Partner Sonic Electronix at http://www.sonicelectronix.com
  3. Ultimate Integration! NavTV M650 GM + Vehicle in Motion Mod - Cadillac Escalade System Install Vid 2  


    Installations - Started by ,

    Sound System Build Pics here - https://www.stevemeadedesigns.com/boa...
    Turbo Install pics/video's here https://www.stevemeadedesigns.com/boa...
    Visit http://www.goturbo.net to see their amazing products!
    Find all your car audio needs here: http://www.sonicElectronix.com
    Visit my site! Join the forum! http://www.wcCarAudio.com or http://www.SteveMeadeDesigns.com/board
    This video is just the beginning of what will hopefully be a nice, clean sounding stereo system i will be installing soon.  It may not do anything special at this very moment BUT it is one less thing i have to do later on during the build. Thanks for watching!
    Armageddon Twin Turbo System
    XS Power D4800 AGM Battery
    Mechman Elite Series 370A Hair Pin Alternator
    28" Forgiato Concavo 3 Piece Wheels
    Pirelli 295/25/28 Tires
    Lowering kit: 1.5" Front / 3" Rear (Slightly modded for more drop)
    Wilwood TX6R / Aero4 Big Brake Kit 
    (Custom Powdercoat White)
    Front: 6 Piston Caliper / 16" Rotor
    Rear: 4 Piston Caliper / 14.25" Rotor
    Steel Braided Lines
    Blacked out chrome
    Facebook Page here:
    https://www.facebook.com/SMD-Steve-Me...
    Follow: http://www.twitter.com/meade916
     
  4. Extreme Car Audio FAIL is FIXED! "Bucket o' BASS" Chevy Truck - MORE JUICE and No Birdies! Video 12  


    Off topic video's - Started by ,

    tons of pics here - https://www.stevemeadedesigns.com/boa... - Join our car audio community today! Tesa Tape from here: http://www.ceautoelectricsupply.com RCA's by http://www.sundownaudio.com Subs by http://www.dcAudio.com Mids/highs by http://www.b2audio.com Battery by: http://www.4xspower.com Amps by http://www.incriminatoraudio.com My old buddy Rob, known him for 30 years, came by and said his fuses kept blowing..and asked if i had a "40 amp" for him. I took one look at his system and knew i had to do something. I fixed him up and got him on the road. I told him, when i have time, i will go through and fix all this stuff for you. It's BAD. REAL Bad. In a funny way. I guess he got it mostly like this. I don't know who is responsible for the bucket o' bass but i HAD to share this with you guys. Make sure to subscribe and hit like if you enjoyed this series! I will do it again soon for someone! Support these videos here! http://www.patreon.com/meade916 Visit my site! Join the forum! http://www.wcCarAudio.com Also, check out my other pages: Instagram: http://www.instagram.com/meade916 Facebook Page here: https://www.facebook.com/SMD-Steve-Me... Follow: http://www.twitter.com/meade916 Visit SMD Partner Sonic Electronix at http://www.sonicelectronix.com
  5. INSANE SOUND SYSTEMS! CRAZY LOUD BASS, LIVE! Sky High Car Audio 2018  


    Off topic video's - Started by ,

    Visit my site! Join the forum! http://www.wcCarAudio.com All of the live video we put up got hit with copyright so we had to delete it and do a little editing. The reason it isn't exactly the best quality is because we shot everything live. I have lots of MUCH better quality footage from another camera i will upload soon! thanks for watching! Also, check out my other pages: Instagram: http://www.instagram.com/meade916 Facebook Page here: https://www.facebook.com/SMD-Steve-Me... Follow: http://www.twitter.com/meade916 Visit SMD Partner Sonic Electronix at http://www.sonicelectronix.com
  6. Subwoofers Destroy truck! 6 15's Painful Breath Taking Roof Shredding BASS demo!  


    Off topic video's - Started by ,

    Visit my site! Join the forum! http://www.wcCarAudio.com We shot the entire day LIVE on youtube! check out the previous video's to get an idea what it was like to be there. thanks for watching! Also, check out my other pages: Instagram: http://www.instagram.com/meade916 Facebook Page here: https://www.facebook.com/SMD-Steve-Me... Follow: http://www.twitter.com/meade916 Visit SMD Partner Sonic Electronix at http://www.sonicelectronix.com
  7. This thing SUCKS! Unboxing & Building the GIGANTIC Laguna C-Flux 3hp Cyclone Dust Collector  


    Off topic video's - Started by ,

    Check out all the new CNC pics here: https://www.stevemeadedesigns.com/boa... visit: http://www.stevemeadedesigns.com/board - Join our fun, friendly and knowledgeable community today! Now there will be 2 cnc machines buzzing and also a big ass dust collector humming away all day...music to my ears! Support these videos here! http://www.patreon.com/meade916 Visit my site! Join the forum! http://www.wcCarAudio.com Also, check out my other pages: Instagram: http://www.instagram.com/meade916 Facebook Page here: https://www.facebook.com/SMD-Steve-Me... Follow: http://www.twitter.com/meade916
  8. Ultra LOWS & Powerful BASS! Hard Hitting Toyota Truck 3 18" Subwoofers Full Tilt 19HZ  


    Off topic video's - Started by ,

    Visit my site! Join the forum! http://www.wcCarAudio.com We shot the entire day LIVE on youtube! check out the previous video's to get an idea what it was like to be there. This is one of the hardest hitting, lowest frequency vehicles i have ever heard. Much love to the bro Justin Henke! Bro....you outdid yourself! Ridiculous! thanks for watching! Also, check out my other pages: Instagram: http://www.instagram.com/meade916 Facebook Page here: https://www.facebook.com/SMD-Steve-Me... Follow: http://www.twitter.com/meade916 Visit SMD Partner Sonic Electronix at http://www.sonicelectronix.com
×
×
  • Create New...