noph33rracing

It's about 1/16''- 1/8'' less than 6''. Ill change the title

Sorry, sold quick on CA

1. Product: 4 6'' aero ports, pvc from home depot 2. Specs: Each one is about 6 5/8'' long. You could heat up the ends and make your own flared ports. 3. Description/Condition: Leftovers from an old box 4. Price: $8 shipped each 5. Pictures:

1. Product: Shok Industries 8 gauge speaker wire 2. Specs: Grey, ~10.5 ft 3. Description/Condition: New 4. Price: $8 shipped 5. Pictures:

Sold

1. Product: Pioneer DEH-P6100BT 2. Specs: In-dash AM/FM, CD, MP3, WMA player with Remote Built-in Bluetooth technology supports hands-free calling with a compatible Bluetooth phone iPod USB direct connectivity via your standard iPod-to-USB connection cable allows you to charge, control, and playback your iPod through the receiver and stereo system Detachable face OEL (Organic Electroluminescent) display Wireless remote control included Blue button lighting CEA-2006 compliant amplifier Power Output: Peak: 50 watts x 4 channels RMS: 22 watts x 4 channels (Pioneer Certified) RMS: 14 watts x 4 channels (CEA Certified) CD Text Display MP3 ID3 Tag Display (Title/Artist/Album) Ever scroll allows recorded text information to scroll continuously on the display 1-year SonicElectronix.com warranty Playback and Audio Features: Playback of CD, CD-R, CD-RW, MP3, and WMA Supertuner III-D Tuner with 18FM/6AM presets Advanced Sound Retriever technology restores the audio frequencies lost when digital music is compressed, resulting in enhanced digital music playback EEQ (3-band parametric equalizer) Two-way crossover with high and low pass settings Best station memory Expandability Options: 3 Sets of 4V preamp outputs (front, rear and subwoofer) Built-in Bluetooth technology SIRIUS Satellite Radio Ready: Pioneer SC-C1+CD-SB10 tuner, subscription and antenna required and sold separately iPod Ready: Direct connection through USB HD Radio Ready: Pioneer GEX-P20HD required and sold separately Front-panel auxiliary input: 3.5mm (headphone jack) allows connection to portable media devices such as MP3 players, etc. Additional auxiliary input can be added by connecting the Pioneer CDRB10 or add the Pioneer CD-RB20 for an auxiliary input and CD Changer Front USB Input Steering Wheel Ready: PAC-SWIPSV1 required and sold separately 3. Description/Condition: Good condition, I have just upgraded to a flipout pioneer. I have grounded the RCA's out on the back. Wrapped them with speaker wire and soldered them to the case. There is no engine whine noise now. Comes with cage, faceplate and wiring harness. No remote. 4. Price: 110 shipped 5. Pictures:

ttt

I've ordered 10 subs from Rusty, all got to my house within 3 days after the order. Just a rough time with running out of parts.

1. Product: 1 Spool of Shok industries 12 gauge speaker wire 2. Specs: 12 gauge, 300ft 3. Description/Condition: Brand new, didn't end up needing it at the moment. I will not split up sections. 4. Price: 90 shipped 5. Pictures:

1. Product: MA Audio HK398 2. Specs: 600 Watt 2 Channel Amplifier 150 watts x 2 chan. RMS @ 4 Ohms 250 watts x 2 chan. RMS @ 2 Ohms 600 watts x 1 chan. RMS @ 4 Ohms Bridged Thermal, Short & Overload Protection Circuitry Platinum Plated Screw Type RCA Jacks RCA Outputs: 1 Pair Adjustable Input Gain: 200 mV - 4V Double Sided Black Epoxy PCB Board Variable High Pass & Low Pass Filters Platinum Plated Block Terminals Fully Regulated Power Supply Stainless Steel Finish Heat sink 0-18dB Variable Bass Boost Quiet Fan Cooling System Full Mosfet Circuitry 4 Ohm Mono Stable THD: <0.05% Signal to Noise: >90dB Dimensions: 9" L x 12.4" W x 2.7" H 3. Description/Condition: Good condition. Ran it in my girls car bridged at 4 ohms on her 15'' DC Lvl 3. Got a steal on a new amp on criagslist with a little more power. 4. Price: 70 shipped 5. Pictures:

Trying to get 2 4k's, don't have the money right now... Can't wait till more power is in here Just got a new indash, still tweaking the settings on it.

Beefy amp here TTT

I do have the bass knob, not sure if it works. It'll be included but you need to get a 5-pin phone cord.

1. Product: RD Audio 3250v2 2. Specs: Digital class-D linkable mono block amplifier MOSFET PWM power supply Daisy-chain through output RCA Double sided through hole epoxy PCB Stable into 1 ohm and 2 ohm parallel amplifier connection availability 24dB/oct variable crossover Variable subsonic filter Variable bass boost Variable low pass filter Variable phase shift Efficiency : 86% @ 4 ohm, at 100Hz Multi-way protection circuitry (Thermal/over current/speaker short/speaker dc protection) RCA line input Tested voltage & THD : 14.4V & less than 1% THD Operating voltage : DC 10V~18V power input- 2008 models RMS power, 2 ohm linkable/dual mono 5600w x 1ch RMS power, 0.875 ohm mono 3750w x1ch RMS power, 1 ohm mono 3000w x1ch RMS power, 2 ohm mono 1500w x1ch RMS power, 4 ohm mono 750w x1ch Signal to Noise Ratio >100dB Low pass frequency crossover 35Hz~300Hz Subsonic filter 10Hz~60Hz Bass boost @ 45Hz 0~18dB Phase shift control 0~180 degree Frequency response 10Hz~350Hz (+/- 1dB) T.H.D @ 4 ohm <0.1% Efficiency @ 4 ohm 86% Fuse rating 300A(external type fuse – not included) Input Sensitivity 200mV to 6V (+/- 5%) Dimensions 222(W) x 52(H) x 590(L)mm 3. Description/Condition: It is mint now, it was blown. Repaired by 807tubenut on here. He beefed everything up that RD half assed on. tubenut is now an authorized crescendo dealer and his website is ampenstein.com Amp is in full working order, i took a video of it running 2 of my 4 subs (at 1 ohm). One of the mounting tabs is bent upward, you could probably put it in a vice or somethin and flatten it. He is warrantying for 1 year, and the warranty is transferrable (you just have to register the serial number with him and the warranty stickers are still on there) Here is a thread with pics on what he did: RD3250V2 repair - Car Stereo Classifieds 4. Price: 430 shipped 5. Pictures: http://www.youtube.com/watch?v=I_pMf6-n-KE

Had 2 in my girls car tuned to 34hz they got pretty damn low

1. Product: Brand new set of CDT 6.5'' grill's 2. Specs: 6.5'' Dark Grey 3. Description/Condition: Brand new 4. Price: $18 shipped 5. Pictures:

1. Product: RD Audio D9 + cash on my end 2. Specs: 5400 rms @ .75 ohms / 3600 rms @ 1 ohm. Will run .5 all day without a sweat. 3. Description/Condition: Full working order. Been running it at .5 (before rise) on 4 15'' XL's off good electrical 4. What you are looking for: Looking to see what people have in terms of (2) 4k amps. There is a guy selling mint powerbass 4k's on CA for about 500-550 a piece. Wanted something like that but he doesn't want to trade. I don't think I want to run 1 big amp (7-8k) at .5 daily. Not looking for expensive sundown etc... 5. Pictures of your item for trade:

(2) 15'' Lvl 4/Lvl 5 Coil (4) 15'' Lvl 4/Lvl 5 Coil (2) 8'' Lvl 2's (4) 15'' XL's (1) 15'' Lvl 3

Yea i got lucky, saw that at home depot and I knew it was almost a perfect match

I called RD he said they don't have the parts to fix it, he said he knows some people if you give him a call and ask he can refer you to them

1. Product: Rd Audio 3250V2 amp 2. Specs: * Digital class-D linkable mono block amplifier * MOSFET PWM power supply * Daisy-chain through output RCA * Double sided through hole epoxy PCB * Stable into 1 ohm and 2 ohm parallel amplifier connection availability * 24dB/oct variable crossover * Variable subsonic filter * Variable bass boost * Variable low pass filter * Variable phase shift * Efficiency : 86% @ 4 ohm, at 100Hz * Multi-way protection circuitry (Thermal/over current/speaker short/speaker dc protection) * RCA line input * Tested voltage & THD : 14.4V & less than 1% THD * Operating voltage : DC 10V~18V power input- 2008 models RMS power, 2 ohm linkable/dual mono 5600w x 1ch RMS power, 0.875 ohm mono 3750w x1ch RMS power, 1 ohm mono 3000w x1ch RMS power, 2 ohm mono 1500w x1ch RMS power, 4 ohm mono 750w x1ch Signal to Noise Ratio >100dB Low pass frequency crossover 35Hz~300Hz Subsonic filter 10Hz~60Hz Bass boost @ 45Hz 0~18dB Phase shift control 0~180 degree Frequency response 10Hz~350Hz (+/- 1dB) T.H.D @ 4 ohm <0.1% Efficiency @ 4 ohm 86% Fuse rating 300A(external type fuse – not included) Input Sensitivity 200mV to 6V (+/- 5%) Dimensions 222(W) x 52(H) x 590(L)mm 3. Description/Condition: Blown. Turns on for few seconds, then turns off. Protect light flashes when it turns off but doesn't stay on. Could get it fixed, I do not have any quotes from anyone. I do have the bass knob, not sure if it works I never used it, you will need to get the 5-pin phone cord for it. I cannot see any visible burn marks on the board. 4. Price: 100 + shipping 5. Pictures:

Lol no problem, turned out nice. I'm so used to wiring my 4 15's up, at first i wired hers wrong and the amp went into protect right away, I was like noooooooo but then i got it workin good haha

I had actually told em to do just the DC lettering in pink, but they did the whole dustcap. But I like the way it turned out.

It's a 97 acura CL