Jump to content

00sdime00

Members
 View Profile  See their activity

  • Posts

    2618

  • Joined

  • Last visited

 Content Type 

Posts posted by 00sdime00

  3. Southeast Showdown. Anderson Sc, July 19th 2008

    in Member Videos - Host 'em & Post 'em! System Vids / Off Topic

    Posted · Edited by 00sdime00

    Hell yeah it was hot.. Came back with a suntan.. I tried to get a farewell demo and tell ya bye and all but when i walked over there you were PASSED OUT lol. I tapped you on the shoulder and you didnt move lol.

    Better hurry up and get em on here!

    Everything go alright on the drive home? OHH tell me about this power wire smoking after i left???? lol

    -BS

    :lol:....yeah I was passed the fock out..long night it was.

    yeah...about that wire :01nocomment8so: It was an over sight on my part. When I put my fuses back in from primering the truck, I did not tighten one of the set screws enough, so there was a shitty connection...I just cut the bad end off the wire and made sure every screw was tight..didn't have a problem at all after I did that.

    00 dime00 NICE flex on the wind sheild in the vid of "the guy from greenville" :hairtrick:

    Thanks bro.

    I should have the vids up after I get off of work.

  9. The New Toy For The Kid

    in Member Rides & Builds -- Show off your whip, Show off your System!

    Posted

    Got to wait and see how that will come out (LiL Beast) and today I took the Beast to get it tuned a little better and I did pretty good on the meter

    A 153 and change sealed on the glass at 31hz.

    133.3 in MECA style drive by peaking at 27hz./ 30 secs

    154.1 Outlaw style at 32hz.

    152.9 streetbeat/USACI

    Tried bassracing and that's hard

    15,000 in Bass

    Very nice #'s....Looks like it likes the lows as much as my truck. Mine does a 154.4 @ 36hz, a 152 and change @ 27hz and over a 150 @ 25hz all sealed up on the dash.

    Can't wait to hear The Beast. :good:

  10. The New Toy For The Kid

    in Member Rides & Builds -- Show off your whip, Show off your System!

    Posted

    yea, i will be down there on Monday night to get all the last details finished with the house and business. I will stay for 10 days and come back to NY to p/u the fam/house stuff/ and all my toys. Should be down there for good by August 5. I will go to HIN on JUly 19th to see what Orlando has to offer. I know Pipo will be there from what I read in another forum.

    Oh, you have (4) 15", i guess I better handle my business then but I would to get a Demo. I might have to bring the Beast out just in case LiL Beast get his ass handed to him. Big brother is watching.lol

    yup..I do have 4 15's..it's nothing special, but gets the job done. :D I want a demo from both the Beast..and LiL Beast :D

  17. Question About Compressor In A/c Compressor Location

    in Air Ride / Hydraulics - Got Switches? Want Switches? Post here!

    Posted

    My step daughters bf came over with his new 1994 s10 he bought for like $1k its bagged all around, but missing the compressor and to me looked like it was missing the air tank too, but it was dark...

    He was telling me how the guy was running his air bags off of the original A/C compressor... I was lost, I never heard that before, but it looks like it was hooked up all lines run to the original a/c compressor location

    is there a trick to buying a A/C compressor and hooking up the air tank to it? what kind of PSI is comming from that? it cant be much....

    Anyways, just trying to help a kid out

    I know a few people that have tried to use the stock Harris compressor as an EDC and all I can tell you is that it will work...but not for long. It probably has a York or a Sanden on it.

    you have to use either a YORK or a SANDEN. there is NO WAY you can use a stock a/c compressor off a s10. so he must have had one of those in there. engine driven compressors have their pro's and cons , you have to constantly fill them with oil, or they will burn up, they will go to about 220-240 psi on the big york, if you ever seen an Oaisis compressor , that is the heart of it , with an Oasis you dont have to have it running off your belt assembly. if i were him, i would get 2 viar 380's or 480's on a 8 gallon tank. that's what im running. you can find a used Sanden edc ( eng. driven comp.) from a junk yard for about 40-50 dollars, but then you got to get a mounting bracket for it. ive seen refurbished ones on ebay for about a hundred bucks ( with out the bracket ) btw sandens only go to about 150 psi. some people love them, some people have no time for them cause they are not is reliable as electric compressors ( viar,air zenith, oasis, etc.. ) so anyhow , my suggestion ( or opinion ) is to get some viars and a tank ... btw, you would still need a airtank if you ran an EDC........... ;)

    My Sanden 709 does pretty fine by me. I have ran it at 200 PSI daily for the last year without a single problem. I have even had it at 250+ PSI quite a few times....Hell, If I am not mistaken Kris Dye used to run his at 300 PSI daily on his old white S-10. There is a lot more maintenance involved with running an EDC over an electric and there is a hell of a lot more involved in the installation of one. I personally would have an electric as a back up if you do plan on running one.

  18. Typer Vs Aq Hdc *metered* Take It For What You Will

    in General Audio - Can't find a category for your question? Ask here.

    Posted

    sealed on the dash legal?

    or

    in the kick?

    USACI Street Beat rules for ya David

    1. No constructed enclosure or speaker placement that may manipulate the SPL sensor may be placed forward of the “B” pillar and will be considered reason to reclassify the vehicle to the Port Wars or Super Port Wars divisions or disqualification. This decision will be at the discretion of the head judge.

    2. Scores will be determined by an average SPL taken over 30 seconds. Only music may be played. (No test tones or sine waves).

    3. Sensor placement will be any place in front of the “B” pillar facing forward with globe affixed … or mounted to windshield without globe at 12” to the left of passenger’s side A pillar and 4” above the dash. (Competitor’s choice)

    4. Only commercially available music may be used for judging (no burned cd’s). Music must contain a discernable bass beat or rhythm. (Must be music). Music with intentionally extended bass tones will not be allowed. This will be evaluated by the head judge

    5. 1200 rpm maximum (no revving engine during test).

    6. Windows up or down, doors and/or sun roofs open or closed. Doors can be fanned but not slammed during the run.

    7. In the event of a system malfunction prior to a score being recorded, the competitor will be given 5 minutes to make repairs and attempt to register a score.

    8. Factory or factory replacement front seats must be installed in the vehicle in factory locations. Must have the front bench or both front seats.

    9. No woofers larger than 8” inches may be forward of the “B” pillars. (Limit 4)

    10. All woofers larger than 8" must be behind the back of the front drivers and passengers seats.

    11. SB5 is the only class open to any vehicles that use a system voltage higher than 14.7 maximum or utilize multiple alternators. Any competitor meeting any or all of the above qualifications may compete in SB5 by choice.

    12. Reruns are allowed.

    13. Any current USACI member who competes in at least one Street Beat event will be invited to compete in Street Beat at the USACI world finals.

    14. In the event an issue arises that is not covered above, the final ruling will rest with the on site event director.

  21. Chickens 2002 Caddy, The Hoopty 8 18" Fi Btl + Rockford Fosgate (2) T15k Amps! UPDATES! IPAD AIR 2 In Dash page 335

    in Just Meade....my projects - Tons of SMD Builds here!

    Posted

    i got my plate full for sure, the work just never stops. I wish i had a crew and 40hrs a week to plug away but i dont. Im stoked though, i didnt know how to take the dash off as of this morning but now im a pro :D i was sweatin it hard :D

    Takin the dash out is the easy part homie...puttin it back in is my least fovorite part. :( Just remember that some extra screws and shit means you put it back in right :lol:

    Keep up the tight work bro ;)

  23. Another Great Best Buy Story...

    in Off Topic - Random, Misc posts - the forum "Junk Drawer"

    Posted

    I used to work at a CC roadshop and Im willing to bet Im not a retard in any aspect of car audio and am probably more knowledgeable than a good majority of this site. dont lump them all together.

    Werd. I spent a few years working at various CC Roadshops in CEN FL and all I can say is that not all installers at the retail chains are complete idiots. Few and far between I will agree with tho. ;)

  24. Weight: Birch Vs Mdf

    in Subwoofers / Enclosures

    Posted

    The Baltic Birch that I used on my wall usually only comes in 5'x5' sheets. You can find it in 4'x8' sheets, but it is pretty hard to come by. It is 18mm(almost 3/4") and has 13 plys. It is usually void free in all layers, and comes in grade B/BB. It is lighter than MDF and is much easier to work with compared to most other hardwoods. It has also gone up in price quite a bit since I last bought it. I just did a friends box in it and he paid 65 bux a sheet for it...compared to 41 bux a sheet when I bought mine from the same place a year ago.

×
×
  • Create New...