martydmb
-
Posts
120 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by martydmb
-
-
How would I find out what my two saz-3500v2 are doing strapped with the amm1? They also have dual power and ground inputs. Does 2 1/0 wire fit through that hole?
-
Do you know what -10db overlap means? Just because you are listing to "regular hiphop" doesnt mean none of it was produced above -10db. So if you have a -5db recording your going to clip... unless you do a 0db overlap yoir going to run into clipping at some point. How much....? Depends if you go through every song you play in audacity and find out what levels its at.. a soft clip wont hurt...
-
Would like to see what the saz-3500v2 does on the dyno. Would send 1 of my amps in if need be
-
So I was able to find someone who uses this same bracket. He has 2 350amp excessive amperage alts on it. So going to pick uo this bracket!!! Just need a alt for it now.
-
-
Slince I cant find no one that makes them but this site im going to to go ahead and try it out. This is the link above.
Says it adds a ford/motorcraft 4g alt to my magnum. Not sure what you offer for that type of altenator. Are you located by north carolina? Or am I thinking xs power... I know someone there that maybe could use his car to fabricate a braket if you guys are able to..
-
Was fine with 1 d3100 and my 320amp alt for 1. On stock alt that was 160amp I ran just 1just fine with a d3100 (as starting battery and only battery). Dont remember what voltage drops.. though
-
On few decaf songs I seen it hit once or twice 12.2 but usually on the heavy bass songs its 12.5v and up on the smd voltmeter
-
Sorry dont know how to edit post with phone but I meant adding*** another 2 d3100s
-
Run 320amp mechman and 3 d3100 on two saz-3500v2 strapped at 1ohm both amps seeing .5ohm just fine. But added 2 more d3100 because I want to go with one amp and bigger
-
Running 2 filters is just fine. Obviously he likes the sound. So its not hurting him. I have mine set on my deh-80prs and my amps. Dont know any monoblock amps with allpass setting. Have mine set at 63hz with a 12db crossover. Amp is set all the way to 250hz
-
When the red light turns on for distortion is when it does the overlap. Its not the dd1. The dd1 you used a tone to set the overlap and when it went to distortion you turned back till light off. Dd1+ when it hits distortion and you press the overlap button, you are essentially doing the same but without a tone on a disk. Cant set overlap without the distortion light on. When the light comes on thats distortion at 40hz 0db. When you hit the button you can go to -15db. I did -5db on my amps
-
2
-
-
Could be from engine heat? Also what does your alt charge at? If you over charge and consistently do it, it will have a effect to the battery. Throwing those to out
-
Dont care what you have to say about 5k rms to the sub. What EMF told me. Not sure why you bother replying here. You have no info on the sub so keep it to yourself. As I was asking sundown anyways to make sure what EMF told me is right.
-
1
-
-
-
So no 18" coming?..
-
Think you are the one I sent pics to of my zv4 on facebook showing what they did to help fix this.
-
I did. All he said was sundown didnt give specs. Just 5k watts rms and 4.25-4.75cubes for 15". I want atleast 1 18 when the basket tooling is done. I re went through the post about the carbon fiber dust caps and someone asked about how to put on team woofer. Said to tell emf and rhey can add it on it. So got that covered. But fig could get some specs so I could get a box built. More need 18"" specs though than 15 but fig if 18" fell through in making Id go 15 then.
-
No specs are on any of the team woofers on the EMF site but can order it and have the build time for them. I heard/seen that the team 18 basket getting retooled. So im holding off till then unless otherwise hear later on that itsnot happening ill order the 15". What box size rrecommended for the 15" and 18" (if the 18 does come out). And rms. Heard its 5000 watts with 4" coil. How do I go about getting that carbon fiber dust cap put on also through EMF? Thanks.
-
Your not doing 2 runs positive and negative to a 3500 unless you get toolmaker dual input terminals ;-)
-
I now seen that he said passive. 2 then.. my bad!!!!
-
Hei said high mids and low. Sounds like 3 different things being powered. More than likey that four channel is doing 2 channels to mid and 2 to highs like I have done with my deh-80prs. So... 3 is what he needs to do High Mid and Lows not 2. Just like how Meade did on his 5 channel amp. 3.
-
You need 3. 1 for each.
-
Voltage drops in winter. Car has a block heater.
New LiFePO4 battery
in XS Power Batteries / Chargers! (and other stuff too)
Posted
Sean from EMF said $2500 on FB