[need new brakes to help my 26'' rims PLEASE!!]

i been talkin to a guy on tirerack.com and explained my situation, heres what he suggested, will this help at all or will i be in the same boat a year from now if i put these on?

http://www.tirerack.com/brakes/brakes.jsp?make=Hawk&model=LTS+Truck%2FSUV+Pads&group=LTS+Truck%2FSUV+Pads&autoMake=GMC&autoModel=Yukon+Denali&autoYear=2002&autoModClar=

http://www.tirerack.com/brakes/brakes.jsp?make=Power+Slot&model=Power+Alloy+Cryo-Treated+Rotor&group=Power+Alloy+Cryo-Treated+Rotor&autoMake=GMC&autoModel=Yukon+Denali&autoYear=2002&autoModClar=

i know the pic shows 5 lug, but thats just for advertising, he says i will get the 6 lug

so what do you guys think? worth the trouble and money? ive decided to kick it up another $400 for budget, i can do $1000

[need new brakes to help my 26'' rims PLEASE!!]

ask n8, i believe he did upgrade breaks, calipers and rotors when he did the 24s on his pick up truck

i think that was a good option with out going with something super expensive

would you happen to have his full user handle?

[need new brakes to help my 26'' rims PLEASE!!]

go to my thread i just started got 28's on an impala go to subwoofers/enclosure section its "my box is coming along"

what you do for brakes?

[need new brakes to help my 26'' rims PLEASE!!]

For under 600 you're not going to really find what you're wanting. But for 600 you could buy some good cross drilled rotors and some nice ceramic pads which should help. Does it still do the pulling thing when you brake with the stock rims? If so you may want to have your calipers checked out as well.

no the swerving is gone with the factory wheels..

[need new brakes to help my 26'' rims PLEASE!!]

hey bros, i need some help please, i have a set of 26'' wheels i put on my 2002 yukon denali last year, everything was fine first few weeks, but as expected over time they were just to much for the factory brakes, my steering wheel started shaking as if i needed a wheel alignment which i didnt because when i threw my factory wheels back on in the winter time the wheel shake went away, also when i had my rims on when i would hit the brake the truck would swerve slightly to the right..to the point i would have to turn the steering wheel to the left a bit whenever i braked to compensate for the truck wanting to turn a bit to the left, so my question is can you guys suggest a good set of brakes i can throw on there to help stop these problems but not big enough to where i cant throw the factory wheels back on in the winter time? if possible can something like this exists for $600 or less?

[WTB: 3000-3500 watts into 1 ohm]

looking for a new or gently used amp that does 3000-3500 watts into 1ohm..im not looking to low ball anyone but my budget is only $400, i am paypal verified..please let me know if you can help me out..thank you

[8 inch free air sub?]

Kicker comp 8"

i noticed that, i was hoping for atleast 200-250 watts, 100 is a bit low

[8 inch free air sub?]

im trying to replace a 8'' factory sub in the car and i was wondering if you guys can suggest a few 8'' free air subs that i can just put in place of the factory, the only one i can find it jl's 8'' midbass driver..any suggestions guys?

[tuning for levle 3's?]

hey guys im going 3 cu ft for 2 level 3 12's what kind of tuning do you guys use for these for rap? keep in mind just cause its rap i dont want it to sound like muddy ass..lol id like it to be musical..each sub will be getting 500 watts..this will be my first time with ported and i dont know shit about port area, volume all that stuff..and im having the shop build the box for me and install it, so if you guys can give me some numbers i can write them down and hand them to the shop..by the way reason im going with 3 cu ft is cause on there website it says 1.5 per 12'' unless you guys know something that works better

[lvl 3 12's ported or 15's sealed?]

my max i have for a box is 4 cu ft

[lvl 3 12's ported or 15's sealed?]

hey guys due to space restraints, would you go with 2 12's ported or 2 15's sealed? i have 500 watts to throw at each lvl 3 and 90% of the music will be rap?

[level 4 in sealed box]

Mr.p's jeep 12 ...15's sealed doing 156's on lil power

i just saw his vid, i dont want to insult the guy by saying i wasnt impressed, but i think i'll stick with level 3's in sealed and leave the level 4's for a different system when i go ported

[level 4 in sealed box]

i saw a thread here where rusty said even though it doesnt say so on the site, the level 4's do very well in sealed boxes, has anyone tryed these in sealed?

[100 sq ft of sound deadening enough for]

damplifier is way to expensive for me, im getting 100 sq ft eighty ml thick of rattle trap by fatmat for $160..it would cost me $260 from damplifier and its only 60ml thick

[100 sq ft of sound deadening enough for]

67' x 3' is 201 sq ft. and should be plenty

ebay ad says 2 Rolls of 33.5' L X 18" W

[100 sq ft of sound deadening enough for]

hey guys the car is a cadillac cts, and im only doing 1 15'' fi q, do you guys think 100 sq ft is enough? 67' x 36'' 80mill thick?

[difference between 2 and 2.6 cu ft box?]

the sub is rated at 1000 watts rms, its a fi q series, im gona add the cooling option which adds the extra 200-500 watts rms power handling they claim..reason i feel i need to add it is im going to put 1000 watts into it and some people have said it will blow..so if i go do for the bigger size 2.6 which someone here mentioned it will need less power would i be ok still putting 1000 watts into it when i add the cooling feature?

[difference between 2 and 2.6 cu ft box?]

ok thanx man..lol

[difference between 2 and 2.6 cu ft box?]

hey guys im looking at a sealed box and the specs on the sub are 2-2.6 cu ft..i only have 1 shot at this since im having someone build the box for me and i dont have money to try a few different boxes..so my questions is this, if i go near the lower 2.0 cu ft the sub will be deeper,lower but the output will be lower, and if i go towards the 2.4-2.6 the sub will have more output but wont be as low?

[lvl 3's sealed box specs]

umm dont hve the specs memerized but i sure wouldnt. and why doing sealed?

not sure..i always been a sealed guy all my life..ive never had a ported system

[lvl 3's sealed box specs]

hey guys do lvl 3's 12's really perform well in only 1 cu ft sealed? is anyone here running them in that size of a enclosure?

[how much you think i will need]

do people usually do the doors?

[how much you think i will need]

i have a cadillac cts with 3 12's..im not sure if i need to sound deaden the doors and roof has well or just the trunk and the side of the trunk? how much sq ft'g you think i need or regular damplifier?

[sub facing up in trunk?]

yeah im hoping the 150 sq ft will be enough for the trunk, the sides,the back part by the license plate, the doors and the roof

[sub facing up in trunk?]

its a 2007 cadillac cts, im also picking up 150sq ft of fatmat rattle trap for sound deadening