jpmo
-
Posts
12 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by jpmo
-
-
Ok this is what I got so far I plugged all into torres and got the following 19.25 box width 9 H and 12 D. My port dimensions are 7.5 H and .5 Wide 13 long puts me at 34hz this port ratio is 1:15. Is this bad? This is for 1 Sundown Audio E-8 or SA-8 . My net volume is .58 cubes. The actual box will be 40 but putting in port wall leaving it 19.25 w per enclosure space. Thanks.
PS. I also calculated .10 for sub volume I noticed this on sundowns page for the E-8 but it says the SA-8 is only .08 strange would think the sa would take more room.
-
Currently working on an Ported Enclosure for 2 E8's in my Jeep Wrangler JKU. I may move in the future to SA-8s but as of now the wife will hold me to the budget. So the following is what I am working with currently. I need help on making sure this will work for Cubic feet and need help on this port length. Please help.
Port have separator setting 2 chambers apart. 1.5 in width run to end of enclosure leaving 1.5 from back and leaving me with remainder on Port Extension Length I need help with this extension length to fit into the parameters of the E-8's
40W x12D x 10 H 2-8sWall Thickness 0.75 inFront Baffle Thickness 0.75 inExternal Width (W) 40 inExternal Height (H) 10 inExternal Depth (D) 12 inInternal Slot Port Width (SW) 1.5 in / 38 mmInternal Slot Port Height (SH) 8.5 in / 216 mmInternal Slot Port Depth (SD) 26 in (?) not sure guessing please help.Thanks for your patience and co-operation with this.
Sundown SD-3 Line : In the Works
in Sundown Audio - GREAT Amps/Subs! GREAT Customer Service!
Posted
Found my next sub. Cant wait.