[Two x15's.. Am I expecting too much ?]

<a href="http://s651.photobucket.com/user/thatgooch/media/Mobile%20Uploads/image_zpscaiddnmz.jpeg.html" target="_blank"><img src="http://i651.photobucket.com/albums/uu240/thatgooch/Mobile%20Uploads/image_zpscaiddnmz.jpeg" border="0" alt=" photo image_zpscaiddnmz.jpeg"/></a> I hope I did this ok..port is 6.5 inches wide 21 inches in depth and 16 inches tall

[Two x15's.. Am I expecting too much ?]

Agreed to set gains correctly as all have said.

In addition, i'd try turning your subsonic filter down...assuming you have a decent box for those subs, you probably have no need to run the subsonic at all.

What would be considered off on the subsonic

[Two x15's.. Am I expecting too much ?]

Looks like I've been doing a lot wrong...is the box ok at least

[Two x15's.. Am I expecting too much ?]

What about using a mtx crossover before the amp. Or is that just something I don't need

[Two x15's.. Am I expecting too much ?]

I new to this stuff but how would more power help..not sure at this point

[Two x15's.. Am I expecting too much ?]

Thanks for the help..as far as the box the measurements are 43" wide 25" depth 21 on the height.subs up port back.

[Two x15's.. Am I expecting too much ?]

Geez I'm old I guess.. not sure what tool map is

[Two x15's.. Am I expecting too much ?]

maybe just set everything on zero and go from there

[Two x15's.. Am I expecting too much ?]

Maybe "clipless" when settings are flat

I do agree with you on that. I starting to think I have just been boosting the output with it up like that.

[Two x15's.. Am I expecting too much ?]

The hu is a kenwood excelon and is supposed to be clip less.

[Two x15's.. Am I expecting too much ?]

Thanks.. I'll try to find someone with a little knowledge to check it out.

[Two x15's.. Am I expecting too much ?]

I knew It I'm stupid

So here's a dumb question what should I do.

[Two x15's.. Am I expecting too much ?]

So here's my problem I have a 2001 Ford Explorer. I have done a big three using zero gauge wire. I have a 270 alt with stock battery upfront and to stinger spv70 in the back.The subs are wired down to 1 ohm on a saz 3500. I'm smelling coil burn which tells me I'm sending too much power. my gain is a quarter of the way up subsonic is at 11 o'clock on the dial. Everything else is turned all the way down. Everything on the head unit is set to flat except for the sub woofer output which is on 15. Not sure if this should be set to flat as well and then start to readjust.any help is appreciated.thing sounds amazing just stinks to high hell when it gets loud