Jump to content

Will11690

Members
 View Profile  See their activity

  • Posts

    4

  • Joined

  • Last visited

 Content Type 

Posts posted by Will11690

  1. Advice needed on what amp to choose.

    in Amplifiers

    Posted

    I changed my mind a bit on the AMP setup. Currently I am planning on using 3 Fosgate T400X2ad 2 channel amps. That would give me all 6 speaker channels I need. That gives me my 180w minimum per speaker location I need. I am still hoping for a 1 amp solution to this though if anyone knows of one.

  2. E1500.1 ?

    in D'Amore Engineering - High Quality Car Audio Installation Tools & Accessories

    Posted · Edited by Will11690

    On 5/25/2024 at 4:17 PM, Audiohz said:

    The biggest turn off is I am getting a turn off thud via the amp to the subs when I shut the system off that I have never had with any amp in this car .

    I'm using an audio control LC6i in my ford fusion that has had the "thump"/speaker pop issue on shut off since I installed it. Typically I think the LOC(if one is being used) is the culprit here. I'm using its GTO feature to turn the LOC on which turns the system on which is where my problem comes from. If memory serves what causes it would be the head unit turning off before the amp. I didn't have much luck fixing it so I decided to live with it. If you are having a similar issue, you could try wiring in a physical shut off switch to the REM wire on your amp then try shutting it off first before you turn the car/head unit off and see if the issue still persists. From there I'm not sure what to do since, like I said, I could not figure out how to fix this issue myself.

    Knowing your full setup, such as factory or after market head unit, LOC(if there is one) and such would help as well.

  3. Advice needed on what amp to choose.

    in Amplifiers

    Posted · Edited by Will11690
    typo

    My current plan is 2 1000.4 amps to power 6 channels. I am looking at the B2 Rage MI 1000.4s because I love the one in my Ford Fusion. That being said I'm also looking to cut costs if I can by reducing the speaker amps to 1 if possible. I want to keep the factory setup of all 4 doors plus the center and rear deck. With that in mind is there a 6 channel 1500 watt door speaker amp that can fill my needs? I've googled around but I only seem to find amps that are built to power 4 doors and 1 or 2 subs(from what I can gather reading the power outputs of the channels anyways).

×
×
  • Create New...