dred
-
Posts
59 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by dred
-
-
-
I think you could also use the Notebook Product Number or Model Number and even the Warranty Check
And while i'm @ it ...
Removing and Replacing the Hard Disk Drive for the dv6000 and V6000 series notebook PC
Looks like it's Sata b.t.w.
Good Luck
-
Why not take the drive out?
If it has lots of pins:
its probably an ide/pata drive.
if no pins:
its a sata disk.
grtz.
-
http://www.youtube.com/watch?v=673Nucfvxvw
Vid up!
Please remember, I know this thing isn't bouncing my rear view mirror off, but take notice, everything I show was ALL 90 BUCKS!
Love to see it but
'video is private' ...
-
1x Plutonium GZPW 18 SPL = 92 lbs (approximately euro 1600,- / $2265,- )
Shipping $300 ?? (MyUS.com Shipping Rates)
$ 2565,- ...
-
Try the Pinned Topics in the Tunez section.
You never know ... might be songs in there ...
-
Makes it a tie between 'Civic Guy' and 'my-eye-popped-out'
-
I am assumeing that for a good bandpass the Thiel specs of the sub should be considered
qts of the woofer needs to be < 0,3.
the Q of the enclosure depends on the purpose. 0,7 - 0,9 for general music,
everything above will result in the 'one-note-wonder' and eventually kill the cone because of to much port gain.
Hope this ^^ is useful info,
good luck with the built!
:drunk:
-
not sure which subs we are going to use...might be some eclipse at first.
I suggest you read up first
(If you don't want to go through bandpass hell that is)
-
-
bandbass boxes are usually one note wonders.
When built with a hacksaw, a hammer and calculated on the back of a beer mat... yes.
-
Use a plugin for winamp?
<link add>
-
you know, that's not a bad idea. have sealed and ported, all in one box. but how would i go about the wiring? like shouldn't i have it push-pull so they don't interfere with eachother?
Again: Yessir
I've never built anything like a Bandpass 3 chamber isobaric thingy but
as long as you half the size of the closed chamber (when going iso) you're fine.
For instance:
1 speaker:1 cuft
2 speakers: 0.5 cuft
(if you don't it will peak even lower)
My gf is running a Bandpass 3 chamber in a cabrio
with good results. So it's a pretty powerful design.
Be sure to tune 5 hz above the frequency you want it to be,
it peaks lower.
-
Yessir
-
http://www.the12volt.com/12voltimages/bandpass.gif
so i'm getting one kinda like this but to hold 2. so has anyone had experience with these? and are they kinda easy to build? i'm gonna be putting my 2 HFI12D4s in it. then i'll move up to 4 12's and do a different kinda box. but i just wanted your input on this.
Mount the 2 HFI12D4's isobaric in the bandpass enclosure and half the size of the sealed chamber ...
It will play with 'a bit' more authority ...
-
some fast posters om this forum
-
-
name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>"> name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>" type="application/x-shockwave-flash" width="425" height="350">
-
Get the one thats most appealing to you and use common sense while driving it.
My 1st bike: Yamaha Vmax
no regret
-
Wild guess:
try a different dns server.
-
"a cap is absolutely useless unless you have 0 voltage drop and you want to clean up the ripples at the top and bottom waves"
i really like this one!
-
After reading this again i'll have to refine it a little bit.
The formula:
Speed of Sound : Frequency = SonoTube Length, is a full wave length.
You'll have to divide SonoTube length by 4 for a quarter (and 2 for half)
All the above is for a straight line enclosure.
Best thing to do is built a test thingy
nothing fancy just some crappy old 6 or 8" speaker and a square enclosure,
mount your 'sub' on a plate that can slide up and down in the enclosure and move it.
grtz.
-
I really like this one :
-
How about 2 15's isobaric and ported?
This setup will half the needed ported box size of 1 15.
Tahoe Gets NEW PIRELLI 25 Series Tires!! (Pics/vid) (PICS OF SPLITS PAGE 4) New Vids Page 6
in Just Meade....my projects - Tons of SMD Builds here!
Posted
Nice high quality vid!
I really enjoyed this one