Jump to content

a_steezy

18+ All Access!
  • Posts

    841
  • Joined

  • Last visited

Posts posted by a_steezy

  1. So i recently ordered my btl and ordered a D1 by mistake.. so now im needing to find an amp that will do around 2500-3000 rms.. Ive thought about the kicker zx2500.1.. but let me hear some other suggestions.. not looking to spend more than 600-700

    zx2500.1 imo is a great amp

    prolly what i'd go with for running at 2 ohms

  2. In all fairness- new box more charging system.

    Make those CVRs rumble

    -Drew

    ehhh box is fairly nice, running a 8ft^3 after displacement and bracing tuned to 32hz...

    charge wise i have a D3400 up front and a 170 amp alt... i think it's good enough... i need to check voltage from the amp, the meter on my dash while driving stays at 13.9-14

    any box ideas? if you're ever in reno let me know and we'll meet up, i'm right off robb dr. first exit in reno coming from cali :good:

  3. i miss my L7 15" alot...

    so i'm thinking about running two 12" L7's in place of my four 12" cvr's

    i'm leaning one way but open to opinions and wanna know what people say

    my trunk is more or less taken up by audio stuff, with box and amp, box is huge right now, so L7's would be a smaller box

    i personally like the deep rumble of the L7's and the lower beastly sound that my cvr's couldn't keep up with even with the box on the cvr's at 32hz and my 15" L7 was at 38hz

    what would you guys do? i miss my L7's but am i going to be let down going from four 12's to the two? i'll probably tune next box to 34-36

  4. Just got my windows tinted yesterday, the whole hr and a half drive home i didn't smoke i dipped. I got back into town and bought some cigs, left my rents house and accidently rolled down my window, now it appears theres little bubbles along the seal, but i'm pretty sure there were some there before i rolled it down. What should i do? Wait it out?

    there is a tint section somewhere in the forum, i think in interiior/exterior, not sure

    but i say wait it out for a day or so, when they tint it you need to let the windows dry for a day or two depending on outside temp for the moisture to evaperate

    not to sure though, just what i'd do.

    how dark did you go?

×
×
  • Create New...