[How Do You Wire Leds Into Your Car?]

I use the fuse panel inside the car. usually under the steering wheel (or close to) and pull the power from there to power my LEDs

do you think you can give me a site where i can find this thing, cuz i think i have that adapter but my led's wire is wayyyyyyyy too small, and any good led sites?

[How Do You Wire Leds Into Your Car?]

What wires do you use do you have to run the power directly to the battery or is there something i can tap into? and any good led sites you can give me would be great, because i cant find anything good local. thanks

[Fi Add Ons For Ssd's]

As you ask the same question for the second time....

Your other post was responded too and then locked..

Maybe its too hard for you to click the link for your answers? Lol

Since im in a good mode, ill type them out for ya

Flatwound coil (+$20) – The flatwire coil option simply helps the power handling of the sub. The coil has more surface area to dissipate heat and will take more power then the regular round wire coil that comes in the ‘stock’ version of the sub. This option will also make the sub tend to be more prone to ‘peaking’ for a budget daily driving sub where you don’t have to use a ton of power to get maximum output and sacrifice sound quality a little bit.

In other words, a flatwound coil uses a rectanguler/square wire wraped around the coils former. A regular voice coil uses round wire. Flatwound is better!

Copper coil (+$5) – The copper coil is a heavier coil and adds mass to the moving assembly. In comparison to the stock coil, or the flatwound coil, this has the smoothest transitions musically speaking. It is less likely to peak, and is a better overall sub for more Sound Quality based daily drivers.

NOTE!! You CAN NOT use both flatwound and copper coil, its either one or the other, you will benifet more from a flatwound coil if your giving the subs more then their rms rating.

BP Power (+40) helps flow all of the air under the dustcap around the voice coil for better cooling, comes with an extra spider too. Which will allow the sub to handle more power.

Flatwound coil option and BP Power is the best you can get for the sub for higher power applications.

If its more of a SQ system you are going for, id say go for the Copper coil, and the BP power option.

thanks it just said that no one answered the last one so, i reposted.

[Fi Add Ons For Ssd's]

What is a flatwind coil? Copper Coil, and BP Power? what do they do and are they worth getting?

[Fi Car Audio Sub Add On's?]

What is the Flatwind coil and what does it do?

What is the Copper coil and what does it do?

And what is BP Power?

This is for the SSD series. Thanks

[What Kind Of Fiberglass Cloth And Resin Should I Use?]

Lowe's carries Elmer's resin, I really like the stuff. much better to work with than Bondo brand from Home Depot.

Thanks ill look into it

[What Kind Of Fiberglass Cloth And Resin Should I Use?]

you need to stop posting in one of these threads. One is enough. Mods get mighty pissed when the board gets clogged up.

This was my first time posting and i thought i messed it up, so i did it again, my fault

[What Kind Of Fiberglass Cloth And Resin Should I Use?]

cheapest resin you can find and some matt or woven roving

Can you buy that at Lowes, or Home depot. And what type of Resin?

[What Kind Of Fiberglass Cloth And Resin Should I Use?]

I was just wondering what kind is good for a decent price, i am using it for the inside of a sub box.