Jump to content

PUNKYOU007

18+ All Access!
  • Posts

    5281
  • Joined

  • Last visited

  • Days Won

    1

Posts posted by PUNKYOU007

  1. Nice. Thanks guys. I just wanted to make sure before I go fuggin things up.

    So this is my plan and you guys feel free to correct/suggest things.

    Ohio Gen 240A alt (which I have already) with an MLA hooked up to it so my 12v side actually charges in the 14/15 volt range. I will use this to power the truck like I am currently doing. It will also charge my yellow top up front. My mids/highs amps will be on this electrical system, even tho all of my amps can be run up to 18v i see no need to put them on the 14 volt side of things as they do great power on 12v.

    I am going to purchase another alt, I have been talking with Ohio Gen and they offer a 275 with external reg for $550. I may or may not go with that specific alt but either way whatever i get will be externally regulated and will charge 4 XS D1400s. as many runs as I can fit on the alt stud to the 4 bats in the back of the truck. The only thing that will be connected to the 14v XS batts is my two Cadence ZRS C5's.

    As long as there are not other issues it should be relatively easy. And hopefully I will see some nice power gains from my amps.

  2. What mr ricky up there was saying was you have to have something to bump that second alt up to 16v. Normal 12v charges at 14v so 14v would charge at 16v. Other wise your 14v batts would just see there resting voltage.

    Edit: thought you didnt understand what he was saying.. But pretty sure you cant have both systems grounded to the car..

    Yeah for the 14v side of things it will have a dedicated alt just for the XS 14v batteries. I am going to get one with an adjustable regulator to handle this. I already have a HO alt that I am gonna use for the 12v side of things.

  3. do you mean seven 2volt cells to make 14volts?

    shouldn't be an issue.

    or some xs power 14 volt batts

    or kinetic

    ive thought about doing this in my tahoe

    keep the stock location alt running every thing in the truck and your mids and high amps

    then the second alt externally regulated and charging at 16-16.5 volts

    Pretty much what I am wanting to do. I know physically hooking it up is nothing, i know how to do that. I guess I am more interested in whether there will be or could be any ill effects from running two different voltages. The only common points will be the grounds.

  4. This is what i use.

    Square

    Tape Measure

    Countersink bit for countersinking the screws

    Drillbit for predrilling

    Wood glue

    1-1/4" Drywall screws (these come out after the glue is dried)

    Bar or pipe clamps

    Table saw or circ saw

    Router with upcut bit

    Jasper Jig

    Now if you dont have/cant afford to buy a router and Jasper jig you can cut the holes with a jig saw, they wont be perfect but they will work just fine. Be creative and use the tools you have. Also I cant stress enough to people, USE YOUR RESOURCES....friends, mom, dad, their friends. Somebody has the tools you need.

  5. I need about 4 D1400s or similar. Need to be 10/10 condition. Need pics of floating voltage. I have seen many post where these go for $150 shipped so that seems fair to me.

    I also have 2 Kinetik HC2400 and 2 HC800 that I can trade. They are 12v batteries and are in good shape and hold a charge just fine.

  6. How can I block a certain number from texting me and auto send them a messgage back. I am just fucking with one of my boys, I sent him like 30 texts a while ago and he just retaliated by sending me like 80 texts non stop..

    Any Andriod apps that would allow me to block him from sending me texts but at the same time automatically send him a message back. Would be dope if I could customize the message too.

    HELP ME

×
×
  • Create New...