fast85_gt

yes this was during the install and waiting on tthe ground wire to come in lol and i will try to reverce the amps to see it still does it and i will go down on the gain a little aswell but it was set with a dmm ill let you know

nothing at all turned up on slave amp it just protects at fulltilt and here is a link pics on post 9 and some vidsVisit My Website

anyone?

ok thanks

ok i have 2 rd audio 3250.1 strapped @ 2 ohms the slave amp almost always go into protect only the slave turn the ing off startr it back up its fine till i go full tilt again thought it was the rca but done changed them 4 times anyone?

oh i see but where do i place the port cabin side or hatch under the lid

thank for the help guys but i built the box to treos spec maybe i see a new box in my futher but this one does a nise hairtrick tho is there anything i can do to keep it from beating the shit out of my back bumper like maybe some mdf there or something couse 4 layers of dynamat is not helping any

i have a 97ford probe gt hatchback with 2 18"treo ssx and 2 rd audio 3250.1 strapped @2ohms my best on a termlab was 147.6 my box is tuned to 32hz and is 10cubes 100sqin of port before any displacments this was my first time using a termlab i think my score should be higher oh its subs up port back the score was playing jeezy put on what could help me out and what kind of dbzzzzz should i be getting with this set up

i was at a comp once and someone was playing a test tone cd that covered like 10 hz to 120hz all in one sone where can i find this becouse i dont remember where my car peaks at can some one help

changed rca to the slave amp seems to be doing good now

someone plz anwser this ? ^^^

im not thats why i was wondering if unstrapping them will help and just running them @1ohm i could not go full tilt couse the slave amp would go into protect thats why i wont to unstrap them if you think it will help

so does anyone else think wiring the subs to 1ohm and putting 1 amp per sub will help and also when the guy got out his termlab he had to blow the dust off it do you think it may have not been calibrated correctley

no it was tuned to 31hz it was one of the treo made boxes called the hotbox they came out with

edid

its a 97 ford probe gt hatchback the box was built to treos specs i wens 10cubes before diplacments 100sqin of port and tuned to 32hz and i have a yellow top up front and 2 stinger 2150 in back and i know i need more i will get them later and i have a crx type box subs up port back and they are 2 18" treo ssx subs and 2 rd audio 3250.1 http://i361.photobucket.com/albums/oo51/fa...pg?t=1234489006 http://i361.photobucket.com/albums/oo51/fa...pg?t=1234489046

thanks for your reply im going to unstrap them tommorrow and run one amp per sub but i had 2 12's aswell doing 149.4 and then tested the 18's today and was like wtf but it sounds twice asloud with the 18's just low scores and my hatch is comeing up like 3 inchs in the back but tried to hold it down the best we could but maybe after rewiring the sub and unstrapping the amps you think 155 is possable

ok when i strap my amps and play a long bass note the slave amp goes in two protect why? second ? is 147.5db bad on a termlab sealed up on music with 2 18" and 2 rd 3250.1 and would i be better off unstrapping the amps and just wire the subs to 1ohm and hook up 1 amp per sub they are strapped @2ohms now

thanks uhoh im would like to do that so when you dont wont all the bass you can just turn um off

thats what i was thinking but i did not wont to screw anything up

ok im running three amps now and i have never done it before just one amp at a time but my queston is the remote wire on the deck is going to my exzisting amp in the back can i jump from that amp to anuther then from that amp to the last one with no issues any help please

i would like to run 4 batterys but after building the new box i dont have room for 4 just 2 good ones so would the powermasters d3100's work

thanks for the help guys

ok thanks so is there anything that can help with the vibration couse i dont have anywhere to mount them

i dbl everything the box is a 1 1/2 all the way around and 16" tall i dont think it will flex much