[My first box build...]

That is a huge box, what is it going in? You should flush in the plexiglass and where are you putting the other pieces? Looks solid

[See My Roof Wave....]

Nor do I my roof isn't that thin and the flex sound is quite annoying....even with deadener.

Also I don't think its very smart running that amp on a stock battery and alt....atleast not without supplemental batteries in the rear....b/c I garentee your dropping well below 12v.

it was just a temporary thing. I wasnt there to compete, but i was curious and threw him ten bucks to meter it at a usac event. The new build is 3 t30001bd on 6 re mt 15s

[10 Batteries For 3 T30001bd Amps]

Where are you? you looking to sell any?

houston but its a hook up maybe get you some for a little more though ill have to see

[10 Batteries For 3 T30001bd Amps]

I am running 3 t30001bd and 2 t5002 amps on 6 15" re mt. I have about $1000 to spend and I can get ten new d34 yellow tops for $100 each. Or i can get powermaster d2700 for 225 which means 4 2700 or 3 d3100. I can get the kinetic 2400 for 260 so that means 4 of those so what should i do.

10 optima d34

4 pwrmastr 2700

3 pwrmastr 3100

4 kinetik hc2400

I know everbody knocks Optima but what do you'll think? I will compete some but this is in my daily driver expedition, thanks

[See My Roof Wave....]

I metered it just like it is there with only stock alternator and battery and it did 146.6 peaked at 41 Hz

[See My Roof Wave....]

The box is about 11.5 cu. ft. including the port. It is tuned to 32hz and I think it is like 168 square inches of port area 33 inches long

The amp is running at 2 ohms so roughly half power, and i have stock battery and alternator with two runs of 1/0

I need to see what track it is but it is Bass Mekanix