Jump to content

ARMYSGT_D

18+ All Access!
  • Posts

    815
  • Joined

  • Last visited

Posts posted by ARMYSGT_D

  1. Try a better set of RCAs, go from the HU straight to the amp, clean your grounds.

    yeah i tried that its the rca on the h/u. after rewiring everything i got no noise when i changed decks

    had noise when i put deck in my cadillac the noise is off and on now. i may just need to open it up and reground the rca's inside the deck

  2. Have you tried grounding the shielding of your RCAs?

    Wrap a small gauge wire around the shielding of the rcas where they connect to the HU (left & right, sub too if you have one) and then run those wires to ground.

    im going to try that in the morning. does that just happen with kenwood dvd decks alot? the rca coming from the deck going bad ? i know this happens with pioneers but i thought kenwood was good about that.

    thanks alot you have helped me alot

    i tried running the rca straight from the mp3 and i had no noise.

    also i had considerably more noise when i unplugged the antennae from the h/u

    i tried the filter but it took away my midbass what do you think i should do next

  3. finally found the problem it was the front rca outputs coming out of the radio. i plugged the rca from the rear output of the dvd player to my eq and there was no noise my eq only takes 1 input and has front rear sub outs so it works now. is it away to fix this.ita a kenwood dvd player the rca outputs come out of the dvd player they are not fixed in the dvd player

  4. i also remember the only difference from before when i didnt have noice before i took my system out was the antennae plug. i did not have it hooked up because i do not listen to the radio. now i have it hooked up could this be the problem? could that bring noise into the h/u even if its not on tuner

  5. hooked up my ground loop isolater. took away the noise and my midbass so i took it right out .

    grounded my h/u and eq and relay with a 12g wire all to the same spot. (still noise ) straight bare metal frame

    replaced all the rca in the (car still noise)

    im fuckin stumped!!!!

    i figure it is the eq itself or the amp or the head unit that is bad . im thinking it is the eq that is bad it is the cheapest piece in my system.

    ill try bypassing it tommorrow if that aint it im going back to my factory radio and factory speakers and just be pissed everyday cause it not loud enough .

×
×
  • Create New...