t-roy

i have the same set up but 12's how you got that amp set? bass boost,gain on amp and your knob, lpf, mainly your boost.thanks

could anyone help me with this , who was the one on here with the 2 lvl 3 15's w/ the aq1200? or anyone with some thing with lvl 3's and a aq1200

i talked to dj at aq to day and he walked me thru the set up on my 1200d these amps are tough little monsters

does your clip light every just blink a lil?

i really need a test tone dl?

yes you set the remote gain by adjusting the amps gain to around 3/4 and the boost way down because boost is really just a cause to have your gain lower and cause you to clip at a lower gain,

this will not work for me here at home i tried it at work and it worked fine, but know i'm back home and i get the site i click the 50hz and nothing happens any ideas?

ok

got it man i have never had this problem, i had the gain all the way down, i'm a dumbass i guess

i going to go check real quick

which way does the slave botton go ?

alpine cda 9883

got everything hooked up today, i got mid and high but no woofer sound? all new stuff , the aq1200 is on but no sound at all and i have even tried another set of rca, and checked ground and all fuses what else could it be?

what should i have the amp settings on, 0? or ? like the subsonic etc...

thanks

anyone?

2 12" lvl 3 and a aq1200 box is at 33

this might be stupid but what one do i need

is there a site where i can dl a tone cd?

do i just turn the amp gain all the way up and then adjust it at the dash with the knob?

alright

could some one make a template for me( something i can cut out and paint around to make me a lil sign) the size needs to be no bigger than 3.5" x 5" i'd like it to say-------------- Pure Loud------------------- i'd really like to have lil guns for the r and for the L. like the ones on soberbills battery box but it don't have to have guns, i could come up with some thing but i'd like your help!

18 wide x 19 deep and 15 tall with a 1.75" port

18 wide 19 deep 15 tall port is 1.75" wide cut sheet; 18x19 top/bottom 18.25 x 13.5 left side 17.5 x 13.5 right side 18 x 13.5 back 15.5 x 13.5 front port 1; 15.5 x 13.5 port 2; 7 x 13.5 i also slide another baffel in the front on the inside so if you don't do that it will be a lil bigger than 1.7 cube @ 34 but this box sounds great with this single 12"

it really could have used a another coat of bedliner, but it really just needs to be dusted of and the wires cleaned off.