Jump to content

Nirvalica

Members
 View Profile  See their activity

  • Posts

    551

  • Joined

  • Last visited

 Content Type 

Posts posted by Nirvalica

  21. FI audio and face question.

    in General Audio - Can't find a category for your question? Ask here.

    Posted

    BTW can you send me a link to the alternator you got? the one Im looking at is kinda sketchy looking.

    There isn't a link. It's an Iraggi Alt. Amputator series 240A. PM or email Dom. He will hook you up.

    Install is pretty easy on our jeep too. Just have to take off the belt which requires loosening like 4 bolts on the power steering pump, then you have to take out the battery, remember unhook it first ;). Then take out the plastic battery holder (there are 5 bolts for that). Then 5 bolts in the back of the alt to unhook all the wires and two that keep it mounted to the engine.

    Before I did it, I found

    . It clearly explains and shows you visually what to do. Real big help.

  22. FI audio and face question.

    in General Audio - Can't find a category for your question? Ask here.

    Posted

    K thanks for the tip I remember that when I get around to building the box for the FI's.

    I do have to ask tho, if you are certain on the caps? if I lose them my lights damn-near cut off. with them on I only see my In-lights flickering. Not trying to be smart, just hesitant???

    And I plan on getting a 350amp alternator. Do you know s 'Cheap' good battery or 2 I can add on?

    My jeep's a 95.

    2 15"s will have more cone area, so will essentially have potential to get louder then a single 18.

    The roof flex is rediculous, but significantly less after I deadened the roof (which is good). Without the roof vibrating as much, my roof racks don't rattle anymore. Before they were like a giant swarm of jackhammer-toting killer bee's.

    I would say you can keep the caps, they won't hurt too much. If you are going to have a 350amp alt, I don't see why you will need a battery besides the main one for starting. That is assuming you won't have rediculous amps. For instance, I'm running about 1200 watts to my sub with only a 240 amp alt and the regular starter battery. I get barely any voltage drop, even at idle. Sometimes the belt will slip if I'm idling and playing a really loud, droning bass line, but that doesn't happen often.

    I'm guessing if you are planning to get a BL, you will have like a 1500w amp. With a BTL, you will need a bigger amp and you might want a battery or two, I don't know.

    That's my opinion on it.

  23. what to set my resolution to?

    in Computer Talk - News, technology, advice

    Posted

    i want the cheapest video card i can find that has hdmi, vga and dvi outputs on it, i seen one at staples for $80 but didn't kno if it would work in my system

    how do i kno if my video card is a pci,or w/e?

    Well, you can open up your case and look in. Look up pictures of PCI, PCI-E, and AGP so you know what you're looking for. You can also look up the computer model number. Maybe you can find out what it has or what kind of mobo it is so you can look that up. most older computers had AGP and/or PCI. Most new computers have PCI and PCI-E.

    Hows this for a video card?

  25. FI audio and face question.

    in General Audio - Can't find a category for your question? Ask here.

    Posted

    What year is your jeep? I have an 18" Fi Q in my 95 GC. My rattle was pretty loud, and I determined it was the roof racks. I recently deadened the roof and that just about got rid of all of the roof rack rattle. Now it's my back hatch that's making a lot of noise. Get some sound deadener for that.

    I would recommend the BL over the BTL for you simply because it'll be much more expensive in the long run to have a BTL, and a BL will probably get plenty loud for you.

    If you want to check Vids of my sub in my car, check out my youtube page in my signature.

×
×
  • Create New...