[Best Head Phones For Under $100]

If you want the best for your money, i bought the Sony XB-300s for $31 online and everyone i let listen to thought they were $100 headphones the sound quality and bass is very impressive especially for the price they got the flat non tangle wires too like the beats, they got xb500 and 700s too that go up by around $20 each jump up from the 300. Check them out

[Deciding on a box to get for 2 type rs]

read in a review that the sbv12 is good on type rs but a inch too tall, oh well will have to fig it out tomorrow if anyone knows any pre fab ported boxes that are 14.5 height 30width lmk im doubtin it though

[Deciding on a box to get for 2 type rs]

only ported box that will fit that will go up against the back seat between the side bumps that make it so skinny at 30" is this one with the ports on the bottom which ive never seen befor lol what you think?

http://cgi.ebay.com/12-Dual-Vented-Ported-...=item3ca5bdd757

deff gonna have to look on gettin a custom one built reguardless if affordable

[Deciding on a box to get for 2 type rs]

14.5 x 30 x 34 from backseat to trunk latch

[Deciding on a box to get for 2 type rs]

i just looked at like a million ported boxes on ebay theyre all over 30"s i might be forced to make one haha

[Deciding on a box to get for 2 type rs]

just went outside and measured it again came out to a tight 30"

[Deciding on a box to get for 2 type rs]

thats why i said im workin with 14.5" it touches my rear speaker and 29" is side to side i got plenty of room for it to be deep i seen those two boxes from ebay the 129.99 looked good but said depth was 31+"

[Deciding on a box to get for 2 type rs]

all i know it was about 13 and half " tall and 29" side to side and was sealed, can u give me the dementions though of what youd recromend for 1222ds and ill see what i can find atleast?

[Deciding on a box to get for 2 type rs]

Don't buy a pre-fab box. Build your own. That way you can build it to fit your application and can choose tuning, and the box will build for those subs. Will last a lot longer too.

idk, wouldnt really know where to start or how to do everything, was just hopin someone could give me somethin to go off of, the guy at audio place showed me a box that measured out perfect in my trunk and said itd be good on my type rs but didnt wanna just go with first thing i seen or just go off of what someone says whose tryin to just make money off me ya know.. i'll look into gettin one custom made but budget is kinda short as it is since i gotta get a alarm system and installed too most likely have to settle with a pre-fab for around $100 if i can find the right one i dont know much about boxes as it is tho which is why im lookin for help

[Deciding on a box to get for 2 type rs]

Don't buy a pre-fab box. Build your own. That way you can build it to fit your application and can choose tuning, and the box will build for those subs. Will last a lot longer too.

idk, wouldnt really know where to start or how to do everything, was just hopin someone could give me somethin to go off of, the guy at audio place showed me a box that measured out perfect in my trunk and said itd be good on my type rs but didnt wanna just go with first thing i seen or just go off of what someone says whose tryin to just make money off me ya know.. i'll look into gettin one custom made but budget is kinda short as it is since i gotta get a alarm system and installed too most likely have to settle with a pre-fab for around $100 if i can find the right one i dont know much about boxes as it is tho which is why im lookin for help

[Deciding on a box to get for 2 type rs]

Don't buy a pre-fab box. Build your own. That way you can build it to fit your application and can choose tuning, and the box will build for those subs. Will last a lot longer too.

idk, wouldnt really know where to start or how to do everything, was just hopin someone could give me somethin to go off of, the guy at audio place showed me a box that measured out perfect in my trunk and said itd be good on my type rs but didnt wanna just go with first thing i seen or just go off of what someone says whose tryin to just make money off me ya know.. i'll look into gettin one custom made but budget is kinda short as it is since i gotta get a alarm system and installed too most likely have to settle with a pre-fab for around $100 if i can find the right one i dont know much about boxes as it is tho which is why im lookin for help

[Deciding on a box to get for 2 type rs]

Don't buy a pre-fab box. Build your own. That way you can build it to fit your application and can choose tuning, and the box will build for those subs. Will last a lot longer too.

idk, wouldnt really know where to start or how to do everything, was just hopin someone could give me somethin to go off of, the guy at audio place showed me a box that measured out perfect in my trunk and said itd be good on my type rs but didnt wanna just go with first thing i seen or just go off of what someone says whose tryin to just make money off me ya know.. i'll look into gettin one custom made but budget is kinda short as it is since i gotta get a alarm system and installed too most likely have to settle with a pre-fab for around $100 if i can find the right one i dont know much about boxes as it is tho which is why im lookin for help

[Deciding on a box to get for 2 type rs]

what are u looking to buy a box?

yes

[Deciding on a box to get for 2 type rs]

Hey guys i got 2 12" 1222d alpine type rs on the way will be on a alpine mrp-m1000 @ 2ohms only thing i need now is a box, i have a honda coupe so trunk isnt too big it's measured out at about 14.5" high and 29" side to side is what im workin with just havin trouble findin a good box. any help or suggestions is much appreciated!