[problems with brigdging amp...please help]

so how would i bridge it to have it at four ohms???

[problems with brigdging amp...please help]

those are the specs for the amp

[problems with brigdging amp...please help]

Technical Specification

RMS Power Range : 600 Watts

Number Of Channels: 2

Maximum Power: 1600 Watts

Built In Crossovers: Yes

Channel Separation: Yes

Features

Max Power @ 2 Ohm: 800W x 2

RMS Power @ 4 Ohm: 300W x 2

Bridged Power @ 4 Ohm: 1600W x 1

Signal-To-Noise Ratio: 103dB

THD at RMS Output: 0.01%

Damping Factor 125+

Dimensions (10"W x 2-7/16"H x 11-7/8"L)

Tri-Mode Operation

Bridgeable

2 Ohm Stereo Stable

Variable Low Pass Crossover: 40-150Hz

Fixed High Pass Crossover (200Hz)

Variable 0 to +18dB Bass Boost

Variable Input Gain Control

Power and Protection LED Indicators

Thermal, Overload and Speaker Short Protection

Line and Speaker Level Inputs

Chrome Plated RCA Connectors and Screw Terminals

Remote Subwoofer Level Control

Frequency Response: 9Hz - 50kHz (+/- 3dB

[problems with brigdging amp...please help]

alright thanks for the help

[problems with brigdging amp...please help]

Technical Specification

RMS Power Range : 750 Watts

Peak Power Handling: 1500 Watts

Impedance: Dual 4 Ohm

Diameter: 12 Inch

Features

Nominal Impedance: Dual 4-Ohm

Resonance Frequency: Hz 26.4

Power Handling Peak: 1500 Watts

Power Handling RMS: 750 Watts

Total Q-Factor: 0.36

Equivalent Volume: 2.3 ft3

Outer Frame Diameter:12-9/16"

Hole Cut-Out Diameter: 11 1/8"

Mounting Depth: 6-5/8"

Priced per speaker

[problems with brigdging amp...please help]

yeah my cap will go from like 12.4 volts to like 10.2 volts so yeah ive been wondering about that too but ...

[problems with brigdging amp...please help]

they are dual voice coils

[problems with brigdging amp...please help]

i feel like a total jackass, i am having big problems with my amp, i have a soundstorm labratories 1600 watt 2-channel powering 2-kicker cvx 12's, the subs are rated for 750 rms and 1500 peak, when i bridge my amp it will shut off after it hits hard a couple of times, i dont have this problem until i bridge my amp, i have now clue what is going on, i checked fuses, i have a good ground, i have a good power connection, i have my rcas run correctly, and remote is good so ...