Jump to content

Loaferboy

Members
  • Posts

    47
  • Joined

  • Last visited

Posts posted by Loaferboy

  1. Put In a viper remot start 2 way a few weeks ago it takes a resistor for the starter and pulled tach off the cam sensor. I have tried to use all the options for tach sens and voltage. But when it's first started in the morning it Trys starting by bumping the starter instead just running the starter till it starts also it has stuck the starter on till I went in and shut it down the remot start by pressing the brake. Anyone seen this and know what it takes to fix?

    How are you bypassing the transponder portion of the key? You will know it has a transponder in the key if the key shaft has a circle with a plus sign stamped in it. For a tach signal, try looking for a light blue/black wire located in a large harness on top of the motor on the drivers side of the engine, or you can try at a fuel injector. Good luck!

  2. Drinenty of fluids to help flush it through (by that, i mean water). If you're pissing blood, the stone may be too big to pass on its own. If that is the case you will need to have it sonic blasted. This breaks the stone into smaller pieces, then you can pass them one at a time. See your doctor. If they can figure what type of stone it is, you may be able to prevent them in the future. Several types are caused by drinking dark colored pop, like coke or pepsi.

    Advil PM to help you sleep. But with the blood thing, you may want to see a doctor.

  3. He started Paul Jr. Designs and opened up a clothing boutique with his girlfriend (rachel, I think). The he "designed" a chromed out grill for the Coleman company (basically took their design and changed a few parts to chrome and powder coated the legs). Couldn't get other jobs, so he opened a bike shop and hired all those that left OCC. The Spiderbike is the first bike he built in his own shop.

  4. try disconnecting everything from the amps and then only connect the power wires. some amps need to do a reset and this should do it. if the amps turn on with no protect mode, plug in the rca's and check. if still no protect, connect the subs and check. if the amps go into protect with only the power connected, you mat be looking at sending the amps in.

×
×
  • Create New...