[Skar VVX 15's Design: opinions on this?]

Try this out. port 3'' x 32'' x 21'' that shoud give you like 14.50in per CF ant tune you to 35hz

[Skar VVX 15's Design: opinions on this?]

Thats alot of port area you got there....just saying.

[Box designs for 2 Dc 18"s]

Is your 2000 explorer a 4door are a 2door. i have a 4door explorer and dont have that room. i have 41wide---28deep---18tall if you wont room for the port.

[Box Build for 4 Skar VVX 15's Monster Kerf Port]

Are you going to put a brace in the port. i see you have a brace from top to the port but no brace in the port. just asking

[how do i do this?]

oh and the subs are both wired to one ohm

So you have a set of D2 wired to .5 on that amp on a stock Alt and batt.

[dead kinetik]

If its flat dead hookup a hot batt with it to the charger 2amp and let charge overnight then check it.. thats how i was told to charge a dead agm batt.

[component speaker set question...]

Yes you would need to use all 4 crossovers.

[wtb some components or 6x8]

I have some nice 6x8 and some 6.5'' comps

[only one sub is getting hot?]

Dont think the sundown E12 is going to last long on that power.

[which amp should i buy ?? plz help]

The onlyone i would even think of useing is the -DB drive

[Anyone know a Mario B Jones from Houston TX? He's a scammer!]

He scamed someone on another form for a sundown amp awhile back he is a piece of shit

[best spl box for my blazer?]

Subs up port back

[best spl box for my blazer?]

Try something like 27'height 48'wide 26''depth with a 6''tall 28''wide 16''deep port. that would give you 168in of port and a tune of like 33hz-----------hope that helps

[FS/WTT: SMD DD-1 for double din pioneer head unit]

Now i need to get a cc-1 to go with the dd-1...... thanks again.

[FS/WTT: SMD DD-1 for double din pioneer head unit]

pm'd you on. let me no asap.

[Question about strapping]

.5

[ECLIPSE 3100]

do you wont 2sale it 2me are what, i have sent you a pm.

[ECLIPSE 3100]

sent you a pm let me no asap.

[SMD DD-1 and New CC-1 Tuning 2 amps and 1 MTX Crossover]

Nice video Mr Meade

[Help choosing size and number of woofers]

Sundown 3500 but what cubic feet do I have with those dimensions

Looks like 8.57cf gross

[Fox body hp gain help]

If you are going to do a v8 swap drop in a 351 with a tfs-stage 2-cam and gt40 heads and intake with 30pound injecters and 75mm massair and do a 373are a 355gear if its a 5sp-t5 trans a good set of headers and x-pipe and a 225-fulepump and a ajustable-fulereg and get you some southside liftbars a 125-shot shoud have a good runing mustang- i had a 92-mustang with this setup for a streetcar.

[Need amp that will push 2 CVRs, 3 later down the road.]

ebay----audiopipe 1000 for 130.00

[few question about components...]

Thats right thay are on top-mybad- thats the gains for the amp and yes you need to set them all the same. i think you will need a 6ch amp 2run the setup that you have in your car.

[few question about components...]

The mc140 has 4gains one for ea ch of the amp on the bottom of the amp. and you would need a step down to go from hu-to-rca output. as for how you would wire the amp to your setup to run active you would need a crossover to do that. might hitup RAY and ask him for some input on this.

[OS Soundstream mc 140]

You have a real nice sq amp for low power, its 35x4 at 4ohm and 45x4 at 2ohm it was one of the best amps that thay made nice sq but dont make alot of power sounds nice with some good comps, you can send it to me and i will take good care of it for you...