-
Posts
391 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by just1moreamp
-
-
How much Damplifier do i need to put on the roof of my explorer i have did the FILL&SEAL on all the braces and did one layer of Damplifier on the entire roof do i need to put on 2layers are will one be fine, I here the roof is weak on the explorer, is there anything els i need to do to it
-
That set is about 4/5yrs old if you had the tweets that would be nice. and i think thay are 75rms at 4ohm ea.
-
Had a kid f---up my mustang-1990-GT 3yrs ago thay keyed it and when it come down 2it thay take 3estimates and pay you the lowest of the 3 thats how the juge did it, still cost me $675.00 out of my pocket so just check your laws there b4 you let them f--- you over, And you have a nice car and a nice install going on 2.
-
How much for the--TPFDB-4PG block and the PAC PF-2 fan shipped to----75938 thanks
-
you did what to your stock alt,, to make it a 220,, who makes the rebiuld kit for that,
-
How much if i pick it up from you in h-town
-
I am looking for some Deka 9a31s if you have any for sale -pm- me with what you got and how much i need 4 of them thanks.. and shipping will be to zip-- 75938,,
-
I did put a Electri fan on it when i put the dual alts on it. you dont have to do that for the kit 2fit but you do have 2move the batt.
-
the belt i got was 2short but i will get a new one saturday,, the 2alt is wired in to the 1-one with MLA in line so i get 15.5v--15.7v with it and the first one has a MLA on it but i only get 14.9v-15.3v on it.. yall let me no what yall think of the dual alt setup. i have made 3more of them up just in case someone needs one..
-
Yeah, we had to custom fab mine to keep the ac... Did you have to move the power steering resovoir? If so, one thing I learned the HARD WAY is that the hose for power steering resovoir looks like it is long enough to move it to a new location, however, under the pump, the hose will kink and it ended up blowing the seal on my power steering pump
you must have the 4.0-sohc explorer and yes you do have 2move the power steering resovoir on that one--i have the 4.0-ohv explorer and i just had 2move my batt i just turned it sideways, i would like to see your dual alt setup on your explorer with the 4.0-sohc.
-
if you wont to see what 2alts look like on a 4.0-explorer send me you cell-ph and i will txt them to you.. its done and its badass,,who dont wont 2alts on the ride, i love haveing a 270amp and a 200amp alt on my explorer.
-
Had some time 2work on my dual alt kit 2day got some work done any one wont 2see... its not done just yet but i am very close..
-
I am looking for a good 4ch amp to run 8--6.5'mids something like 75wpc at 4ohm let me no what you got and how much shipped to 75938--thanks
-
i may be interested. keep me updated on this. ive got dual d6500 batts which is great but im looking to upgrade alt soon. and fitting duals would really allow me some expandability
what motor do you have 4.0-ohv--are the--4.0-sohc
-
If any of you on here have a ford explorer with the 4.0-ohv in it and wont to put 2alts on it and keep the ac let me no i am almost done with my dual alt kit that i made for my explorer if there is some explorer oweners on here that might wont one let me no i might try and build some for you. when i get it all done and painted i will post pic of it for yall. this ant a for sale thread just trying to see if there is anyone that might wont one when i get done with mine.
-
So 2day is my B-day and i ant doing shit but hanging out with my son rideing 4wheelers and haveing some fun with my son 2day,,, 2day is 5yrs for SMD one hell of a forum,,,my hat is off 2you steve----thanks for haveing us.. I f--- that up you see whathappens when you have to work 14hr on your B-DAY then drive 3hr to get home 2spend your b-day with your son,,,
-
Is that alt off a 4.0ohv explorer. how much shipped to 75938.
-
I have a IA20.1 it ant no aq1200 or sax1200 but i think it will power your sub justfine. pm me
-
So would i be better of useing some pvc pipe for ports i dont wont to do any bends in the port. i wont to tune to 30/33hz so could i do like some 4'pvc are some 6'pvc -idn- shit about porting and tuneing a box.
-
what i am trying to do with this box is have the port run alone the bottom of the box so i dont have to make any turns in the port-like a---14'wide 4'tall 11'deep--- port so i dont have to make any turns with the port. can i do it this way and get the port vol i need without the port being longer than 12.5'deep. thanks
-
So this is with the port on the bottom of the box from side to side are what. i need the port going along the bottom floor of the box. thanks
-
Its going in a ford explorer---max is-41'w-17'tall-20'deep i just cant seem to get it right every time i try its wrong. thanks for your help man.
-
yeah i don't know where you got your numbers from, but all that winds up to
3.94 cubes net, 9.14 square inches of port per cube, 39.92 hz tuning.
Look right here on smd and get torres calculator and try again.
Shoot for 3 cubes net, and 12 to 16 square inches of port per cube.
I have tryed it and cant get it to work for me-idn-// so you are saying i need more port/ i wont to stay around 4cf with the box. boston g5-12' need 2cf ea and tune to-30/33hz is what boston website said to use.
-
I am trying to do my first ported box design bymyself here so tell me if this sounds right to you guys. the box is 41'w 15.5'tall 15.5'deep- outside.subs up. my port is at the bottom of the box and it is 3'tall 12'wide 10.5'deep-tune to 31/32hz i think. do i have enuf port in this box. I am runing 2-boston-g5-12'subs in this box.any help on this would be nice good are bad just tell me what you think...thanks
How much do i need
in Second Skin Sound Deadening and Automotive Insulation!
Posted
I used the damp---not the damp pro