-
Posts
391 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by just1moreamp
-
-
can i get -2- of the 4500d's --let me no how much--$$$--you need ---pm me asap
-
top + bottom = 41 x 25
left = 24.25 x 16.5 (outside port wall)
right = 23.5 x 16.5
back = 41 x 16.5
front = 31.25 x 16.5
port wall = 17.5
add a 45degree ~4-6" in the back left corner to better define the port... and anywhere else just use resin or 2-4" 45degree
can you do it with the port in the center so i can brace the port better and i would like the subs up and port back--how much power do you think i will need to put on the subs---thanks alot for all your time and help
-
41w*18h*25d
7.3cuft@32hz w/100sqin
perfect... use some bracing and it will raise tuning maybe 1hz
if you need a cut sheet i can help with that too
IF YOU CAN SEND ME A CUT SHEET THAT WOULD BE NICE--AND THANKS ALOT MAN
-
can you make the box any bigger
thats kind small after displacement... its less than 6cuft
and what do u mean by custom, what are they based on/off of
with said dimensions i can only get it to 6cuft@35hz w/72.5sqin port
id like to see 7cuft@32 w/100sqin, but it depends on the subs in question
this is the specks-on the subs--QTS-0.48--QES-0.53--VAS-2.634--FS-30hz--RE-1.5--XMAX LINEAR--26mm--XMAX-36mm---SPL-90db-1w/1m---BL-19.1----PE-1800 rms-----thay use the same basket as the --AB-VFL-15'' SUB WITH NEW SOFT PARTS FROM --FI--- AND A COUSTOM 4.5'' COILES - I PAID A LOT FOR THE SUBS HOW THAY SLAM HARD----I CAN DO LIKE-41''W--18''TALL--25''DEEP--ALL OUTSIDE MEASUREMENTS THATS ALL I HAVE STILL HAVE TO DO AMPRACK
-
my box is 41''w--16''tall--23''deep--i think thats like 7.6cf---this is the outside of the box--i need the specks--for a good port for this box -tuneing in the -30hz-to-35hz-----it is for my 98explorer--will have 2--15'' custom built subs in it---any help would be very nice---------subs up port back-----tell me what you come up with--
-
how would this do with like--8--12''d4--subs--just let me no what amp would do the best for that setup--give me a-$---pm me and let me no asapSo... who would do it ?
Lets say if this amp was a full 1 dB louder than even the SAZ-3500D on 12v @ 1 ohm... and the 3500D was already 1 dB louder than the 3000D. Maybe it's already been in testing for a while
So we are talking ~2dB gain from the SAZ-3000D on this bad boy.
Pre-Order price would be around $1200 or so shipped.
Lets see a show of hands.
-
how much for -8-12''d4---subs and the amps to run them--let me no asap---by--pm-D4 only at this time.
-
has anyone heard of higher fidelity subs
-
looks good, they must have redesigned recently, i could have swore the were user standard 12 spokes on there higher end stuff
i have the -cmpx215-
-
crystal. haven't seen anyone use these in a couple years. great subs but i know of some people that used these in some spl events and they weren't the best SQ oriented drivers.
i have a set of custom built subs but they need like 5.0cf ea and i just dont have the room with the amp rack on the back of the box-trying to stay under the windows--if they cant see it they wont steall it--but i am looking for some -spl-out of the subs
-
cool but id run a nice 1000 doller hi-fi woofer
i realy like the crystals have you ever listen to a set of the subs
-
tell me what you think of my set up--i am runing a-nakamichi-cd500-for my head--and a audiocontrol-dqs--my lower midbass is 4-cvt 8'' under my back seat runing on a linear power 2202--i have a set of -cdt-cl61-in my kicks-runing off of a linear power-952--and in my doors in the factory 6x8 openings i am runing 2-sets of pioneer-ts-d720c-comps-with-xtc-enclosers --runing off a mmats-sq4070---now i need to do my box for my subs--2-15'' crystal cmpx215 runing off of orion 2100hcca one on ea sub--- i have the big-3- and a 300amp alt all 3/0 and 1/0 runs and 4 kinetik 2400 batts tell me what you think of this set up -all i need to do is finish the box and the amp rack and i am done---ps- any help with the box would be nice-this is what i have now this is outside-41''w--15''t--24''d--amp rack is going on the back of the box--its like 7.4cf i need a good port and tuneing-hz- for the box--subs up port back--and thanks alot
-
Any help would be good on a box design for 2 12 inch mojos. I already know subs up, port back. Specs are needed so i can build myself. Drawings are even better.. Thanx for any help...Oh this box is for SPL.
try this box out -this is outside specs-on box---41''w--16''t--22''d--thats-like-7cf--before port---port 6''w--16''t--16''deep--that shoud be like -34hz are 36hz----my friend had this box in a 97 explorer with 2-m3mojo 12'' and a mojo2500 on them and it was very loud dond no the spl- it got jacked -2 days before he was going to put it on the -mic-
-
I dont think a square port would would work because the port wouldnt have enough sq inches unless you do like a 8"x8" or 9"x9".
i would do a 9''x9'' are a 10''x10'' as long as its not longer than my box is deep dont wont to do a .L. port
-
are you trying to do pvc ports? i thought you ment slot port
pvc would be ok but a was thinking a square port like 5'' x 5'' x how ever long-are even a 6'' x 6''
-
thats if my calc is right.... maybe some one else can chime in?
i was hopeing to do like a 4'' are a 6'' port by what ever long i need like--6'' by 6'' by 20''long===just let me no what u come up with and thanks
-
how many subs?
if i got your dimensions right...
from side to side of the box *left to right* its 29" long 3" wide and 24" into the box... dunno if i got it right tho, that to me shows 87sqinch of port and tuned to 32 hz but im prob wrong
i have 40''wide and 17''tall and 22''deep all inside the box hope this helps
-
sorry about that i am runing 2-15'' crystal cmpx215 hope this helps
-
so i stared my box today this is what i have so far 41''w-18-t-23''d==8.65cf-inside now i need some help with the port would like it to be ported to 28hz to 31hz--any help with the port size and shape and depth -wood be great--this is my first ported box and i would like to do it right the first time----doing subs up port back- bracing will be 1.5'' dowel rod and 45s on all corners and -fg-resign-in the box--will this do [ let me no if you can help me out and thanks alot]
-
cool good to know about arc, i never heard anything bad before. thanks for the info
KB-AUIDO---575-644-9182----HE IS THE MAN -------STEPHEN MANTS- NOT WHAT HE ONCE WAS
Box Build For Bali
in Member Rides & Builds -- Show off your whip, Show off your System!
Posted
dont think you need to worrie about thay baffle going anywhere with like-60-screws in it