SmokeyDog
-
Posts
233 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by SmokeyDog
-
-
ill check back on this later
any idea please post them up
that sucks i ve been there before with problems
if you wanna check the rca real fast get a cheap pair and just run them.
i would take the hu out check on grounds
in the past i have started fires and melted wires becuse of bad grounds
i have had problems in my car with blowing fuses and not being able to find them.
made the radio not work, ran hu owen power supply for memory and keep acc switch with key
that made it work again.
i dont really know what to tell you but a few ideas maybe
-
ive tried this before and felt better pretty fast (the cloves)
http://www.learningherbs.com/toothache_remedy.html
as far as other stuff orajel.
and if ya have any old pain killers laying around i would suggest those until you get to a dentist.
thanks
-
my wifes tooth is killin her any ideas on how to stop some the pain
-
made a few videos of the getto system. i know it ant much but its my start.
first att with meter dident stay up to long
name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="445" height="364"></embed></object>"> name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="445" height="364"></embed></object>" type="application/x-shockwave-flash" width="425" height="350">got it to stay in one place
name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="445" height="364"></embed></object>"> name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="445" height="364"></embed></object>" type="application/x-shockwave-flash" width="425" height="350">lil ride thought the naborhood
name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="445" height="364"></embed></object>"> name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="445" height="364"></embed></object>" type="application/x-shockwave-flash" width="425" height="350">some flex
name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="445" height="364"></embed></object>"> name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="445" height="364"></embed></object>" type="application/x-shockwave-flash" width="425" height="350">lil more flex
name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="445" height="364"></embed></object>"> name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="445" height="364"></embed></object>" type="application/x-shockwave-flash" width="425" height="350">2 kicker 12 cvr 2 ohms
1 kicker 750.1
what you guys think? am i off to a good start
-
haveing troble finding high output alt for a 06 sebring 2.7 v6
anyone know
-
looked at these on your facebook, cant wait to see what you do with the 4, see if it is as good as mine
have you turned that box around yet?
-
these are just my getto setup. going to be much nicer i got major plans. the problem is i have 3 plans dont know witch to chose.
still going to be running the 2 750.1 amps for the 4 12s getting new alt soon
going to buy wood 3/4 mdf glass and mat the right resion this time. and i will be building it in a garage
not the side of the road on the street behind my car
extion cord running from the 3rd floor window to street
input would be greatly appricated thanks
for that 1/4 plywood was bored and wanted to see what more air space would be like in the sparetire tub.
moneys real tight.
-
What kinda wood did you use that blew apart
1/4 plywood
-
made this with scrap wood getto i know
had to do a lil remodleing to get box in
-
first setup
new kickers
had this more about two 2 days and the wood just blew apart wish i took pics or had it on vid
my first fiberglass job go head laugh
getto box
-
x2
one amp for 2 subs
pics still up loading
-
Amp??
750.1 2 ohms
pineeor dvd touch screen got it so long ago i forget the number
2 750.1 kicker amps
2 going to be 4 12 kicker cvr 2 ohms
custom getto peaces i could thow to geather to make a box box
some 6.5 in the door
6x9 in the back rack
i am broke i can only do so much
pics comeing takeing forever to up load them
telling you know it will make you laugh
-
what you running?
two 12 cvr kickers
-
Naw man you should be fine, also back to your original post I get all my terminals from Ace Hardware, or Home Depot, they have terminals up to 4/0 wire, I like to use 2/0 terminals for my wire as sometimes its a bitch to get all the 1/0 strands in the 1/0 terminals.
i found with the 1/0 lugs if you put the wire in to the end and twist a few times it molds the wire to the shape of the cone then it just slides in like lil dick in a wet pussy
-
-
volted stock alt stock front battire yellow top in back
1 750.1 kicker amp 2 cvr 12 2ohm
name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="445" height="364"></embed></object>"> name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="445" height="364"></embed></object>" type="application/x-shockwave-flash" width="425" height="350">more to come
-
Oh ok so you have the Big 3 done, well then as long as you have an upgraded wire going from the alt to battery you should be good, I would just make sure it is taped off, so it doesnt short on anything.
Edit: To your above post, yes you did it good, you didnt have to cut the wire but since you upgraded it didnt need to be there anyway.
ok thanks got nervus for a min. i was 99.9% sure i had it right, and its taped off.. i just was wondering where it went and if theres any affect on voltage with the extra wire just sitting there. even know theres no draw on it just awnsed my ? i think
-
From what I can see it sorta looks like you cut your alt charging wire, could you get a closer pic of where you cut?
i did but i replaced it with the 1/0 i did that right. RIGHT!!!!! o man i hope so everything is working fine better in fact
-
Is the wire you cut, red about 8 guage in size and had a rubber boot where it connected to the alt, if so that was your charging wire, and now your car will be running only on your battery and your battery wont recharge.
Also the battery is connected to the starter directly from the battery, the other wire you(from the battery) see runs all your accesories.
battire is chargeing got a wire going from alt to battire pos. one from battire ground to sturt. one from battire ground to block. took just the wire off the alt all connections at battire are the same.
-
i dont know why . ill pst some pic in about 20 mins
it was the wire going to the altnator that i cut there was two wire comeing from the (+) on the battire. i am assuming that the battire, starter, and altontor are on curcuit.
battire one wire goes up to the jump start lug other i am guessen starter
that small red wire there is the one in ?
<embed width="448" height="361" type="application/x-shockwave-flash" wmode="transparent" src="http://s375.photobucket.com/flash/player.swf?file=http://vid375.photobucket.com/albums/oo196/smokeypitbulls/004.flv"></embed>
some lil window flex http://s375.photobucket.com/albums/oo196/s...current=004.flv
-
Why would the alternator output go to the starter... OH $h!t, I hope you didn't cut the wrong wire. Can you post a pic?
i dont know why . ill pst some pic in about 20 mins
it was the wire going to the altnator that i cut there was two wire comeing from the (+) on the battire. i am assuming that the battire, starter, and altontor are on curcuit.
-
Good luck on finding it LOL, considering I dont have one on here, do your seats fold down? If they dont I wouldnt waste my time sealing it off from the trunk, also if your set on 4 subs you could do subs up port back, depending on what subs they are, or you could do 2 monster subs sealed off from the trunk, and will most likely get louder than the 4 smaller subs.
As for me I am currently ordering the equipment to start my rebuild, which will consist of 2 12" DC LVL4xl's sealed off from the trunk off of about 2K a piece, with Aero ports in the between the subs.
i would love to go with bigger better subs. but for now i have to make due. moneys tight. there kicker cvr 12 2 ohms kicker 750.1 amp one two 12s 350 each i am guessing
subs are rated for 2.25 feet max ported
seats fold down
if the port faces back there will be no room between the trunk and the port (i dont think thats good)
-
did you cut a wire some where?
yea the one going to the alternator i dont know where it goes to i.e where its connected to. i guessen the starter. everything works better then expected. just wondering.
-
What car do you have? In most cars the only way to do 4 12's sealed of from the trunk is to do like a Half Wall, in my car(03 Grand Am) the I could maybe squeeze 3 12's staggered ported through the rear deck, and that is pushing it.
its an 06 sebring
i going to look at your build next so dont quote me on this but i need to keep my back seat. its bad enough i dont have a trunk anymore. i get so much shit for that. some people just dont understand.
theres room in the trunk and my ruff estmates. make it so i can put a 38 inch wide 34 inch deep 15 inch high. but there would be no room in the back for the port to get any air. my other problem with that is getting the box in the trunk. build a beast of a box, 16 high 32 wide and 28 deep. had a bitch of a time getting it in. (just for now that box is just for a min while i wait for my other 2 subs to get back) and wil be cut out of the trunk.
if i take all the seats out and remove the windsheild i can slide it in from the front of the car (am willing to do that) but not willing to lose the back seat.
help
in Off Topic - Random, Misc posts - the forum "Junk Drawer"
Posted
when to the store got cloves, clove oil, garlic, whisky, i hope one of these works dont get to see a dentist to tomorrow