[recommendations for inexpensive components]

where would I install those in the doors..? and what do they do lol sorry as you can see Im very new to the forum

[recommendations for inexpensive components]

What kind of vehicle?

1997 toyota tercel lol

[recommendations for inexpensive components]

well i was just planning on replacing the stock ones..which are 4 in the doors and 6.5....are making the speaker holes in the doors hard? cause I could always just make them 6.5s...thanks for the responses guys

[recommendations for inexpensive components]

got a site that sells the hertz?

[recommendations for inexpensive components]

Hey I'm new here and just finished installing my two kicker cvr 15's and now I need to find some good components to keep up with these. What would you guys recommend I have about $150 to spend on each pair. Also what amp would I need to run them...I searched around for a bit and couldn't find any good post for 4" components so lemme know what you guys think

the 4"s are going in the doors and the 6.5"s are in the back

[my set up so far HELP subs making rattle noise]

so sometimes when i'm listening to my music loud the sub makes a rattling noise(I origonaly thought it was bottoming out but idk) I've tried looking up to find out what this is...is it because the box is too small for the subs?...maybe someone could suggest a better box for these

[my set up so far HELP subs making rattle noise]

Yeah I looked up setting gains with a multimeter but I think the meter so i set it with a 50hz tone....

the box does suck im pretty sure it isn't big enough for them..my trunk doesn't have much room to work with, can't be much taller or wider, but what would be a good box suggestion for these..? I'd rather have a sealed box I'm more for sq the spl(not that you can have a ported box with good sq)

These subs hit pretty hard with the amp I have now so yeah it is a pretty sweet first set up :tease:

[my set up so far HELP subs making rattle noise]

Oh whats up guys! this is my first post on SMD and boy do I love this site already

So my brother in law gave me his old subs and an amp for my new car

the subs are (2) Kicker CVR 15

hooked up to a jbl 1200.1 amp

head unit is just a JVC K-G220

used a walmart wiring kit lol

I read up on crutchfield and wired them in one ohm....

I am totally new to the car audio scene and don't know that much about boxs and such

heres a pic of the box they are in http://tinypic.com/r/2ry4vae/3 the specs are....16.5" width, 34" long and 12" high

Im pretty sure the box is too high because I get the idk what the name of the sound but it sounds like rattleing or burping idk is this due to my gain being too high or my lpf not at the right fequency for my box its at 32hz..

thanks guys!