Jump to content

xXx iKoN xXx

Members
  • Posts

    85
  • Joined

  • Last visited

Posts posted by xXx iKoN xXx

  1. Just so you know, if your running 2000 rms, that is really not much of a strain on your electrical assuming you have 2 batteries. Dont go buying xs power batts unless you are running 2500 plus.

    I have almost 2000 rms total with two cheap batteries and i dont drop below 13 on full tilt, which is good for amps.

    thanks as the build progresses i will be posting pics and more threads on some advice but for now it is on hold until i can figure which amp i will need.

  2. ok this sounds all kinds of dumb to me... it says 2200w max so you want to run 2000w+. max on these brands usually means thats how much they can take until they fail. some people can run a lot more power than rms to a sub but these people KNOW what they are doing and how to build a box to make the sub handle it. you said you have a dual box, prefab? not going to take 2k.

    how did you test you boss amp? you hooked up another amp and it sounded the same so it must do X power? no TL so see if it was any louder? no clamp meter? not even a dmm? doesnt sound like you tested shit.

    you can "hear" the amp not giving as much power... maybe what you are hearing is voltage drop? ever test that? maybe your already dropping to 10v, "so lets throw a bigger amp in!" to get 2000+ watts you NEED electrical upgrades, what have you done?

    upgraded battery, high powered alt on its way and in process of doing the big 3.

  3. You paying $750 and running dual 0 gauge wire back and upgrading your entire electrical system?

    well i have already rerouted battery to the trunk and am already using 0 guage with a 300 amp fuse. no to mention i already have an extra 20 ft of 0 gauge which is no problem to run one more as well as upgrade the big 3 and i already have another 300 amp fuse and fuse holder sitting around. so lets just say i'm prepared :)

  4. but see the boss amp gets to hot and i can hear it not powering to its full potential so i figure if i can get a much better amp then i will have no problem at all. Also I am getting rid of the second sub and dual box so i can just have the one since it is already hurts everyones ears that get in my car. but if anyone knows anyone with a saz-3000d or another 3000 watt amp that will push about 1600 or more wired to 2 ohm then letting me know would be greatly appreciated.

  5. Not just trying to push this amp since it's what I'm going with but why not a audioque 2200d. Will do 2200rms @1ohm and somewhere around 1000 @2ohm(2ohm is only a guess) your subs are dual 4ohm subs so you can get a 2ohm or 8ohm load out of one and a 1ohm load out of two.

    well in that case if i can get it wired down to 2 ohm then i would like to find an amp that will push about 1800 on a 2ohm load. and the reason i know i am get that much is because i tested it on my friends kicker 2500.1 and it was the exact same.

×
×
  • Create New...