[Need help with wiring.]

Basically watch that I am doing it right and give any pointers or suggestions, cause this will be my first time doing it.

what exactly are you soldering?

[Does this guy really know what he's talking about?]

Autosound guy is a retard. an external amp for your mids and highs makes a huge difference. especially with the addition of an active high pass filter... much cleaner...

[0 Gauge knu fleks wire question]

Just wondering if im overthinking it with the Stinger coupler not having good conductivity with the allen screws and just go ahead and get it and wrap it with electrical tape?

Nahh, do an ANL fuse holder, like 300A, and solder the 0 gauge terminals on the sides of Meade style, if you've seen it...plus that'll give you just a bit more protection...

[amp feedback problems]

the rca's are ran down the center of the car and the power down the driver side and the noise is clearly there at about 1/4 of the gain

25Hz? really .. damn... i still vote power noise..cheap RCAs pick up on everything...

Does it go up with you turn the HU volume up or does it go up when you turn the amp gain up?

On the bright side... If you can play that low, you can burp it at 25Hz whenever you want. lol

[Wanting to build a mini- groundpounder?]

I am wanting to make a semi-ground pounder. I want to do a wall with 10 8 inch subwoofers and a Power Acousticks 2200 watt amp.

My question is Flat wall sealed/ ported? or Clamshell? It wont see competition use but more of a loud daily

Power Acoustik? You're kidding.. right? its a joke.. you're joking...

[amp feedback problems]

I don't think that's "feedback" ... It sounds like power line noise.. how deep is this "low deep noise"?

And no, there isn't really any way to test them with a DMM.

[Amping door speakers.]

I'd say that the RCA on your deck isn't just for subwoofer output.. but I may be wrong. And if you amp doesn't have a pass thru, you can use an RCA splitter, but you need to re-set your gains when you use an RCA splitter because it will drop your input voltage.

[RCAS THROWS IT INTO PRTC MODE HELP!]

I'm going with the gain. If it's jacked to the moon and that HU has a high output voltage... it'll slap for a half second and drop into protect.