BIGTOSH
-
Posts
56 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by BIGTOSH
-
-
i'm looking at getting two 12"bl's, and putting a fosgate 1500bdcp on each one, will be in a ported blow thru box in a ford ranger, will they like this kind of power, and should i upgrade the subs, or will they be cool stock? preciate the help
get the options and the 4" coil
-
2 12" addictive audio
thanks
-
-
Non wall, Chevy blazer
-
what kind of details do you need?
pics,box specs,type of sub,which way ports faced,etc
-
Anyone running 4th order in a suv? If so can you share the details?
-
can you run active with that unit?
-
Prices for 3.5k , 5k . And xl15,xl18. Shipped to23836?
-
-
What's the specs on the box?
-
pics and details please.I lifted my 99Blazer just by turning up the front torsion bars. People say it isn't safe, but I have been running it for the last year without a problem. There are bolts on each side of your frame right behind the front doors that will lift/stiffen or lower/soften your springs. You just need to make sure you jack the front end up before you do it....Otherwise bad things could happen. If you need a better explanation let me know, I will try to post pics of what my blazers torsion bar bolts look like.
Best to do it on level ground too, so that you can use a tape measure to make sure the top of the front wheel wells are the same height too.
-
-
-
Running a 270a on my 99 blazer. Time to change my belt and tensioner. What's the best belt to get?
-
So a pair of xl's on say a pair of aq3500 or similar power will work if your smart with it. But will it be a real noticeable increase over two aq2200 or similar power?
-
Is the imprint needed for that cda117 to go active or can it do it alone?
-
Anyone using the Imprint with their cda-117 to run active? If so how does it perform and is it easy to use for tunning? Or any imfo on this combo would be good.
-
What battery for under the hood replacement?
-
So what's the final thought on this thread? I was thinking on doing two xl 12's in 4 cubes 32hz tune, around 65" of port. Run on a single aq3500.1d. Should I look for more power? More port? Or does this sound good?
-
You know between your tahoe and chickens caddy this s*#t is getting outta control Your making it hard on the rest of us. Soon as the regular guys think they are making progress with their ride,BAM!!! You update the build on on of those trucks and send us back to the drawing board. But keep up the good work
-
steve whats up with the see thru front windows? no tint allowed on front doors?
-
Why does it seem my truck gets louder with front window down or front door open? Or is this all in my mind
-
-
Anybody heard the 6.5 comp set from audioque? Thinking of getting 1 or 2 sets but was wondering how they sound b4 I bought them.
They sound good,smooth. I have had them now for 8 months ran them on around 90wts for a while and now have them on close to 200w per side high pass set on deck at 80hz and fully sound deadened doors.
Another input on sub choice thread.
in Subwoofers / Enclosures
Posted
I'm using a 3.5k or aq3500.1 and have 8cubes. Trying to decide between adding two more 12" IA Lethal Inj so I would have four 12's ran at 2ohm with 2500wts .Or switch to two 15" Fi btl's at 1ohm with 3.5 to 4 k wts. Which would possibly be louder and musical? Does the cone area of the 12's have the advantage over the more powerful and design of the 15's. I know its install dependent,just want some other opinions and insight.