WakingJudea
-
Posts
62 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by WakingJudea
-
-
That did not work, i re stripped the wires just for the hell of it and nothing.
-
Alright ill see if that will work, thanks.
-
So today i added two more runs of 1/0 to my back batterys and after i hooked everything back up my stinger volt meter turns on (the stinger logo comes on) but does not show my voltage. So i decided to unhook the two runs i added and still nothing. Is it time to look for a new volt meter? Volt meter is hooked up to the amp leads and i didnt touch any of that and the meter was working fine last night so i had to have done something wrong.
-
Lying From You is real nice also.
-
the check charging system message came up on my 05 taurus after install but i checked everything and its charging at 14.2 up front and the bank in back is reading the same. any ideas on what i should do/check before bringing it to a shop and hook it up to the computer and see what code it is?
-
Ok how about if I get a 270 dc alt and use a c&d mr12-350 (93 ah) I've got right now until I get more money for a D3100
-
Ill be running a Crescendo 3500 @ half ohm, stock (110 amp) alt, one run of pos and one of neg in 1/0 to the back, starter battery is a Odyssey PC1700. Should i get 2 D3100's for the back or upgrade the front battery to a D3400 and get one D3100 for the back. This setup will be for daily and demos, i have zero plans for competition. I know the more electrical the better but im trying to stay on a budget of about 600 dollars.
-
Im looking for them in good condition and broken in. Im looking to spend about 300 or so dollars for a pair.
-
-
-
interest in a saz 3500?
how much?
-
Im paying cash, let me know.
-
Go to the dudes youtube channel that it shows at the end. You can see what happens after the hit.
-
All depends on how much room you have to work with, you can get the max dimensions of where the box will be going, and you can find a few people on here that will build you a diagram of a box for cheap.
1 15" BL will do good with that amp. If you do want to do 2 15s though, I would do 2 T1500-1bd's. If you have cash for the 2 subs, and enough electrical to back up 2 of those amps, you could go ahead and get all that, then save up for the extra amp.
Being louder though, 2 12s have more cone area than a single 15. But you also have to remember how much power is going to be pushed to the different systems, and it also has a lot to do with the install. Those 12s are only rated at 400 RMS a piece, so with 2 a normal person would be running roughly 800-1k RMS amp to push them. So in THEORY 1 15" BL pushed by 1.5k RMS would be louder than 2 12" cvr's pushed by 800 RMS.
So can that amp push the 2 12' fi bl's for max output or close? If not what two 12's or one 15 would u recommend for that 1500 rockford? Ive done the big 3 in 1/0 wire, 220amp alternator and a p4 diehard platinum battery. Ive looked at 2 12' L7's for the SPL, im not concerned about sq at all if that helps narrow it down.
-
you def need more power, double that
Should I go with 1 fi bl 15 with that amp? Im looking to blow 2 12' cvrs out the water in terms of spl.
-
Can anyone guesstimate how wide, tall and deep a box for 2 fi bl 12's and/or 15's would be? Could I push the 2 15's as good as they need to be pushed with the T1500-1bd Rockford.
Stinger Volt Meter possibly bad?
in Electrical-battery- Alternators- Wiring
Posted
yep thats what i figured, ive wanted a blue one anyways, thanks for the input guys.