MACnonsence6

sorry

why the sad face did something like that happen to u ? and the amps going under the passenger seat not in the trunk

i was actually running this amp threw 4g before on a 30 amp inline fuse but ill prolly put a 50 in thanks for your help

alright so looks like ill be using the bullz 8 how do i find out what to fuze it at becouse the amp fuses are 2 25 should i have a 60 amp inline fuse or

it is 25x2 for fuses would 4g be over kill i had a pyle "3000" watt amp that had the same 25 x 2 fuses lol and it wanted 8g power and ground. i mean i have 4g right now so that wouldnt cost me anymore but if i can use the bullz 8g i rather do that becouse its so much more flexible and would be alot easyer to run and hide threw everything

just double checking to make sure were on the same page u think using the bullz wire thats thinner will be fine to run my 4 chanell amp. idk what i should fuse the amp at its real rated power 50 x 4 @ 4ohms and thats what ill be running it at

so i got 30ft of 8g wire of a member on caco when i get it it looks mad thin its branded with bullz audio says usa now comparing it to my knu 8g my knu is huge but my knu is cca. so i ordered this wire to run from my ap1800 to my pair se 12s i think itll be fine for that but i also planned to use it as power and ground for my duel 4 chanell amp that does 50 x 4 should i use the bullz or should i order something else.

ik the motor makes a differnt but i plan to build a sexxx in the future

is there a plce that sells just surrounds ik i can get spiders. reason im asking is i just ordered my recones from fi and i might later on want to build a pair of re sexxx and id like to be able to save the softparts from my fi recones to eather re sell or re use

the spider and surround was cut in that link im asking if theres a way to take all the soft parts out with out cutting them so you can then reuse them in a differnt sub

re xxx sorry. so how would you go about taking out all the softparts in one piece to essentially recone another sub with that ones softparts

is it possible to remove all the soft parts from a sub saftly for them to be re used with a differnt sub also where can i get a pair of 05 xxx coil

im looking for about 10 8g wire terminals

think i figured out how to paint my little neon but im trying to figure out how much im gona need also im trying to find a good sprayable primer sealer so advice? but this is my plan primer sealer followed by duplicolor http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_Paint-Shop%C2%99-Finish-System-Base-Coat,-Performance-Red,-32-oz--Quart-Duplicolor_7141545-P_N3276_T%7CGRP2050_____ then a mid mattalic coat http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_Paint-Shop%C2%99-Finish-System-Special-Effects-Mid-Coat-Clear,-Metallic-Clear-Coat,-32-oz--Quart-Duplicolor_7141558-P_N3276_T%7CGRP2050_____ then a clear http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_Paint-Shop%C2%99-Finish-System-Clear-Top-Coat,-Gloss-Clear,-32-oz--Quart-Duplicolor_7141551-P_N3276_T%7CGRP2050_____ now becouse its all premixed and ready to spray im trying to think of how many cans of each i would need for my 98 neon its not a very big car but i dont think i could get away with one 32oz can advice please

im only 18 so ima need someone else to buy and share with meh but what do u guys think about that glue i posted

http://www.hobbylinc.com/htm/paa/paapt01.htm so this is the glue i need to get.

ya i never set up overdraft protection i sopose i prolly should and i got the card just so i could set up a paypall acount and sell stuff on ebay i dont have a job atm so im selling all the old audio stuff i have and anything else i dont use on ebay to get money to get my car back on the road

damn ya becouse of ebay fees i acidently over drew on my debit card so i had to pay an extra 20 for 3 dollers over

k so i just sold my ps3 on ebay got 280 and 15 for shipping for a totall of 295 now when i look at my paypall it shows the buyer paid the 295 but for my availible it only says 280 so i printed the shipping lable wich cost 16.00 and it took that out of my availible funds so my question is where is the 15.00 that i charged for shipping. im very new to this so sorry if i sound retarded

just ordered an ap1800 and one of the 2 recones for me re se 12s so im in a pretty good mood now just a few questions does anyone know what kinda waiting period i should expect for the recone. and what kinda glue should i use that can be found at walmart or lowes. also ive seen people use cardboard from a beer box as a shim would u guys say that ok? im looking for stuff i can use with out having to buy more stuff im almost broke now lol

so basically if it would have shifted it would be retardedly obvious

i dont think that happend then so it looks like i should be good and run on sentences are ok i cant spell for shit.

k i need you guys to do ur best to try and understand what im saying here not the middle part wich is the slug? right but i can take a tooth pick and slid it in and out pressed firm against the outside radias of the slug? if that makes sence the place where it would hit if it was shifted but i can do that up and down threw out the gab and i dont hit anything and my other motor i got from the guy is nice and smooth not like this one.

these were wraped in bubble wrap and had styrofoam all around it. if it was shifted and unusable i should be able to look in the gap and notice right? it should be pretty obvious shouldnt it? in looking inside the gap everything looks alright to me but idk i wish i could get a better pic

no thats how it was shipped to me ive been bugging since i seen a thread with the re mt motors that were shifted seen that and was like awww nah. so my motor is still useable and that shouldnt effect its performance at all? i havnt ordered recones yet i was just bugging thinking i was gona spend 160 and still not be able to use this bish heres a better pic still makes it look worse then it is its almost have the tip of this black click bic pen sorry if that sounds dumb but i was trying to find somthing most people have to use as a refernce