Vangel

well im not exactly sure, im looking for an amp that is around 250$ shipped, if theres and amp you recomend please let me know.

ok, thanks so i should be looking for amps that say 600rms at 4 or 2 ohms then?

I havent got the sub yet, its on it way, i ordered it about a week ago. this is what aq says about it though: These subs were designed to hit hard, sound great and last a long time. The 2.5″ DUAL voice coil diameter is big enough to handle the long-term power while light enough in mass to yield high output. The coil is coupled to a strong multi-fiber cone that is reinforced with an epoxy resin dust cap. The EROM, high roll surround is efficient in both excursion and cone area. The suspension follows our philosophy of multiple, high compliance spider layers for tight bass with low fatigue over the long haul. The lead wires are formed into these spider layers which further enhances durability and eliminates lead slap/breakage problems. The frame is cast aluminum with a sandblasted, powder coat finish. The motor parts are all machined with a black epoxy finish to aid in heat transfer. The tight tolerances of the SD2.5 motor provides high energy without excess weight. These subs use the finest parts that can be found, are hand assembled to maintain the tightest tolerances and made especially for you. Everything about the SDC2.5 subs is dedicated to delivering the pounding bass you need. The SDC2.5 series fills the void between the SDC2 series and the HDC3 super woofer. It is the perfect choice for raising the bar in power levels to get that extra bass but still be in the 500-600 watts power range. It doesnt exactly say what its made of though

So i ordered a 12" street duty aq sub and it says 600 rms(continuous power). So ive been looking at mono amps that say 600rms, now, do i look at the power for 4ohms, 2ohms, or 1ohm or what? If anyone can help thatd be great.

Sorry if this is the wrong place to put this, but i was just wondering: What would you rather have, a lifted truck or a lowered truck, whats your opinion?

looks awesome, great work

I found these plans: http://gs171.photobucket.com/groups/u288/IO7W24EBEL/?action=view&current=2cubes35hz3125sqinhr2.png theyre supposly 2.19cubes and 35hz if someone could varify this that would be great. Thanks

ok, thanks alot.

I have compared dimesnions through both calculators and feel i have a good idea of what i need, one more question though, once you have the port in place do you include that space when calculating cubic feet recommended by the company, or just the open space without the port?

it will be in the back of a 1993 old cutlass, i believe the trunk is about 17" high, and plenty of room width wise

ok, so its not very trustworthy then? ill keep looking and asking around, thank you for your help!

Hi, i have ordered a 12" Audioque sub, the company says the box should be 2.2cubes and around 36Hz. I was wondering if anyone knows the dimensions i should use(using .75" mdf board)for a ported box?