klee7013
-
Posts
39 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by klee7013
-
-
Alright thanks.
Will do in a few weeks i need a battery but i just bought a boat which drained me pretty good.
I was just searching because i remember mechman having some of the best prices on xs battey
-
Does mechman still sell xs batteries? I thought yall had them in the past but cant find them anymore
-
not a picture of my truck thought i had one but i didnt-
and also mine is a long bed not a short
but at least i can get the feel for what they will look like
thanks
kevin
-
x2 vise worked good for me also
-
i have an saz3000- in the closet with some scratches- i can pull it out and see if it works if it does i can sell it to you around 425 or so
-
there is something you can mix with it. at least for your last coat which cuts down on the smell- or atleast thats what people say over at the fiberglass forum
-
different forum but i know he is trying to sell one
http://www.soundsolutionsaudio.com/forum/FS-sundown-2000d-sundown-1004-t40748.html&st=15
-
Will need to sand that before you paint it. or like stated above the black will chip off also
-
congrats. x2 great times
-
dam just bought mine good luck
-
ill be waiting for more pics
-
nice i am working on a build for my frontier right now
got 1.5 cubic feet from under the seat but it does stick out past the seat one reason due to mounting depth problems
if ya need to raise the seat because the sub is hitting the seat try these out
and screw them into the rubber stops of the seats mine still lock with a little bit of force and gives you more height in the front part which may help if needed
also keep up the good work
-
I researched alot of different brands and just never saw what fit me besides the kicker and now the SA8.
doesn't matter if its 8" or 12"
hardest thing is finding the right mounting depth
max i can fit is around 5.5" which does cut the list of subs down alot
looked at ascendantaudio already only saw 2 that would work and they were
Assassin Series 8" & 10" and only recommended 250 watts rms was looking for more than that
dont know much about them if i can push more than that or not
MA MA103XE 10" 300 watts rms would be tough to fit 5.6" mounting depth. Almost all i can do now to get 5.5" hmm only .1 i could make that work with a little bit of work
or
MA Audio MA83XE 8" 250 watts rms would fit but still low on the rms for what i was looking for
looked at DD gave up after a few mins trying to navigate their website i felt like this
gonna try to look at them again
guess i was tired when i did it hmmm the
DD1500 1508 8" 500 watts rms hmmm another one to add to my list but no dealer in the area guess i will email and get a quote for it
jl was looking at their stealth sub i believe i can get more for my money with other setups
-
alright thanks for the help definitely going to look into them. actually at the moment they are on my list above the kickers i picked
was looking at their website and didn't see any but went to there authorized dealer's site and i did. then i saw them on the new products for 2010
thanks again now i just got to decide which way i want to go
-
sa ?? sundown audio??
if not what would it be
didn't see any 8"s on their site are they made to order
-
got any suggestions or is my best bet the kicker l7 8" x2 hard to find subs because they dont have to be shallow mount but not many subs in that range that push any where near what 2 kicker l7 8" can
BUMP
-
K the problem i am having is the maximum mounting depth is 5-1/2" its going under my seat. I can get a little bit over 1 cubic foot of air space for the box.
Was looking at the Kicker Solo-Baric L7 8"
RMS Power Handling 450 watts
Minimum Sealed Box Volume 0.33 cubic feet
Maximum Sealed Box Volume 0.75 cubic feet
was planning on getting 2 and putting them in a box of about 1.1 - 1.2 cubic feet of air.
looking for other sub suggestions still not quite fond of the square subwoofer would like to use a conventional round subwoofer in case i burn up or wear out a sub i can look a larger variety rather than the few company's that make square subs
-
Found my next project.
-
Im looking at getting polk db6501 for the front components and db651 coaxial for my back ones and gonna try to push 75 w rms *4 amp at 4 ohms both are 6.5 but maybe u can go from there
Sexy Sax Man (Careless Whisper Saxophone Prank!!)
in Off Topic Vids
Posted
some good shit