rboudreaux77

How about a AQ2200. How many cuft should that box be for it?

How much more? 1500 is rated rms. What about 1800?

How will a XL 15 do in 3cuft of airspace on 1500 watts?

If the AP3000 wont be enought for the 2 15s with 3cuft each then ill just keep my 1 15 and get the AP1800. But over powering it a little should I make the box right at the 3.5cuft suggested or go a little bigger or a little smaller?

Maybe, but will it be a good solution? Probably not. With enough power, it'll be fine. My 2 xl's are in a 6 cube box on 3k each. Will the one AP3000.1 be enough or will I need more?

Lmao! I don't know what to do im so confused and my head is starting to hurt trying to figure out how to make 2 XL 15s fit in there Just don't. Try one 15 or two twelves. Or wall it off and buy two 18's. Well I got 1 XL 15 in there now I just wanted more. I think it can work but ill have to put the box in through the backseat. Box: 46" (W) x 15.5" (H) x 22" (D) and Port: 14" (H) x 7" (W) x 17.93" (L)=37Hz

Lmao! I don't know what to do im so confused and my head is starting to hurt trying to figure out how to make 2 XL 15s fit in there

Throwing up ideas to get 2 15s in my trunk. Would the subs up with aeroports back put up good numbers or not really?

So with aeros in a trunk which way should I point it or them? And have one or mort ports? I always did slot ports so I don't know much about aeros and then just measure the box as if it were sealed or would I count the port too?

Thinking of getting the audiopipe AP3000.1

It was 6.42cuft but thats before displacements Was gonna do a slot pot but im open to suggestions. I want 150db lol. Next time there is a crank it up around here I wanna do trunk 1001-up and I need at least a 143.7db to get a 3rd place state record and I just did a 140.0db with 1 15 on 1000 watts so im thinking it within reach

It was 6.42cuft but thats before displacements

Its a 1500/3000 sub. So i guess 750 per coil

Not what I was suggesting but you can do that. It'll be fine. Each channel is a 1500D. So 2Ω per hcannel = 4Ω Bridged. Lol. This wiring stuff confuses me...I guess im kinda a noob when it comes to that part. I use these websites with the wiring tutorials lol. So I have a dual ohm sub they say 1ohm or 4ohm. And the only specs on this amp are 1ohm (2ch) and 2ohm (1ch) so if I run 1 voice coil to each ch it will be like running 2 single voice coil 2ohm subs?

I want to put another XL 15 in my trunk but the most air space I can figure up and still get the box into the trunk would be like a little over 6cuft total for the subs to share so around 3cuft each. The website suggests 3.5cuft so will this hurt the sub or affect performance? I want to put the audiopipe AP3k on them

Factory rated @ 2000. Why not just wire her @ 1Ω? And wire one channel per voice coil? I would but can I do that? I don't wanna fuck up my sub

Right now I have 1 DC XL 15" and I want to get another one but for the time being I was gonna get the AP3k and put it on my sub but its a dual 2ohm so I was gonna run it @ 4ohms. Does anyone know how much it will put out @ 4ohms? If its 3000 @ 2ohms will it be around 1500 @ 4ohms

Right now on the 1000 it barely moves so im gonna turn the 2500 up till its good if it don't take all 2500 o well lol

Yeah thats what I was gonna do. I was gonna put the port in my S10 on the drivers side too

I was thinking the new cea certified hifonics 2400 or maybe even the audioque 2200 but a guy I know has a shop and they sell audiopipe and they have a 2500 I could prob get a good deal but I don't know much about them. The thing is I have a 92 extended cab S10 and I wanna put 4 level 4 18s or 15s if the 18s wont make it so whatever amp I get now will move to the S10 to power 2 of whatever 4 subs I get then I will get another amp for the other 2 and ill put the 1000/1 back in the impala for the wife

Yeah ima be careful when im tuning it with the 2500. And im gonna build my new box facing in the cabin and seal the trunk off

A jl 1000/1 and the box right now is tuned around 30hz. I wanna get a 2500 watt amp and make my next box around 35hz

Went to a crank it up last night and took 3rd with a 139.2db legal on the dash. Also ran outlaw and got a 140.0db. Now its time for a new box and a bigger amp then im gonna shoot for the state record in the trunk 1001-up class

sorry i didnt read the rules lol i didnt know you werent supposed to post this maybe that rule was made since i last been on the site but anyway i just wanted peoples inputs to which one actually puts out the wattage it says or if anyone had good or bad experiences with either amp before i waste my money.

Looking at the rubicon 2500 or the brutus 2400. Wanted to know which one would be better? I would love to have the RF 2500CP or something but I don't have $1000 to drop on an amp right now so im looking for a decent amp at a cheaper price. Its gonna be pushing my DC XL15 at 1 ohm.