Jump to content

sewerman

Members
  • Posts

    127
  • Joined

  • Last visited

Posts posted by sewerman

  1. Yeah I don't think I can go much over 4 cubes. I need to keep the baby seat hooks, only building to the bottom of those. (got a new one coming in Feb, and brother in law has a new baby too) I might be able to squeek 4.2 cubes maybe? Have to look and see, maybe make a cutout around the baby hooks? Already got the toolbox tray ripped out. I got a max height of 17" on the back wall right now. 59.5" wide.

    Also do the xs 6500's fit in the stock batt tray and use the stock tiedowns?

    xs 6500 fit stock location perfect. i took the back beauty panel out completly. You may cut it out under the hooks to give you more room also.

  2. for the batts go with two xs power 6500. They fit fine.

    for the box, i think you have more than 4 cubes. Take the tool box out of the floor, then you can build it all the way to the truck floor.

    ive done six 10s, three 12s, and now i have three 15s in mine. (always DC subs) plenty of room. of course they are all sealed though.

    Nathan at xs can also get you hooked up with a high output alt. Let me know if you need any advice, ive taken mine apart and put back together several times.

  3. 1. only reason to glass the inside of box is realy to add support and make sure its airtight. mix resin with mekp, cut pieces of fiber glass mat, pour resin in box, spread with paint brush, put pieces of mat in, spread more resin on top of that, and make sure u get air bubbles out. But, doing this is not what makes those badass boxes u speak of.

    2. any auto paint and body supply shop, Home Depot, Lowes.

    3. Not hard, just time consuming.

    4. With experience. I would not tackle door pods until I got good at sub boxes.

×
×
  • Create New...