[how to wire dvc 4 ohm sub to 2 ohm stable 2 channel amp...]

hey everyone, ive got a dual voice coil 4 ohm sub and a 2 channel 2 ohm stable amp. how should i wire this up?? help me out here!! Thanks.

http://www.rockfordfosgate.com/rftech/woofer_wizard.asp?submitted=true&woofer_qty=1&woofer_imp=4

[First Post Going To Make It A Good Post]

I love MMATS products, have used them for YEARS AND YEARS, however a D1000 amp on 1 p 2.0 is WAY WAY WAY TO MUCH POWER. That amp can power 4 of them with ease, not 1. Personally, I had 3 12" P2.5's on a D1100.2 and is was the cleanest sounding bass I have ever had. Are you in GA? I have a MMATS built box for 3 12" P2.0/P2.5's I will give you. Interchangable port (38hz, or 45HZ) and the box is awesome......

Keep in mind, all mmats amps are very under rated......

I had an old Baby d that everyone called a "cheater amp"

rated @ 100 watts @ 1ohm and it quite honestly put around 1000 watts out @ 1ohm i believe it was a bad a$$ amp lol

i am in florida exactly where are you located in ga?? im 100 miles west of tallahassee.

also i said i can do either 1x or 2x of the 2.0 10's but hey if you say itll push 4 2.0s i think itll push 3 2.0 12's right?

[First Post Going To Make It A Good Post]

I used a JBL BP1200.1 on my stock '91 Celica, which led to alternator and battery problems. Just be prepared for electrical problems when using a 1kW amp or above... I got my stock alternator, think it was 65A fixed after it went out, got an Optima Yellow Top as my primary battery, and did the big 3... no more problems after that, except for some dimming but that was it. This is the entire reason why I stay under 1kW.

Optimas were 150$ each got those already going to get some 1/0 from local autozone and do the big 3 asap and now to order some ring terminals or something because no where around my small town sells them...

can anyone do that box program above for me and give me some details on box sizes with the input info i got earlier, box can be as wide as 38"w X 36"h X 68"d so with that info can someone use the program above to build a box for one of those subs and 2x i tried using it earlier but didnt know what all to plug in and whatnot, subs call for a 1.5cu. ft box each sub.

[First Post Going To Make It A Good Post]

Thanks for the links guys but now I am also worried that a 1k amp will be too much on her current alternator by itself so im going to order 2x optima batteries and ask you guys how to correctly do the "Big 3"?

[First Post Going To Make It A Good Post]

http://mobile.jlaudio.com/support_pages.php?page_id=141

it's like they say... Give a man a fish and he will eat for a day. Teach a man to fish and he will eat for a lifetime.

Well some good reads but I am now stuck wondering should I go bandpass or vented or what? Looking for ideas and what you guys think as I am doing a first install and would love to do more.

[First Post Going To Make It A Good Post]

Ok so my wife decided she want's a stereo in her car and as I don't want to put 1000$ into a stereo she's going to listen to driving around town and whatever else she decides to do I wanna build her box and everything do all the wiring etc. etc.

Going with 1 MMats Pro Audio 2.0 10" woofer on a Mmats d1000.2

Speaker Specs

P2.0 10 P2.0 12 P2.0 15

Voice(Ohms) 2 x 4 2 x 4 2 x 4

Fs (Hz.) 26 24 20

Vas (Liters) 69.6 166.0 438.3

Qts .34 .41 .36

SPL (1W/1M) 87db 89db 91db

Power (Wrms) 600 600 600

Mounting Depth 5 5/8 6 1/4 7 1/8

Hole Dia. 9 3/16" 11 1/16 14 1/16

Spea Dis(cuft.) .07 .10 .14

Copied and pasted from the website.

Amplifier

Mmats 1000.2 (1000watts x1 @ 2ohm)

Frequency Response:<10Hz to 275Hz

Low-pass Filter:Variable 24db, 77 to 275Hz

Battery Connectors:2 Gauge

Speaker Connectors:8 Gauge

I'm either going with 1 or 2 of the 2.0s depending on how much she want's me to spend.

My question to you guys, can anyone give me some box ideas for both 1 and 2 10" setups, length x width x height and port and all that, I have never built a box before and wouldn't mind doing this myself.