-
Posts
8 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by jdsfighter
-
-
do sa8s or DD1508s. I have never been impressed with the output of an l7 sealed. 4 8s behind the seat or combo behind/under the seat
Like I said before, on a bit of a budget, being only 17 makes income difficult, I was lucky enough to come in to about $2000, after I get my exhaust work done and the needed repairs on my truck, I'm left with about $1200, I'm also only allowed to make one order from kicker a year (since I work at best buy, we get heavily discounted prices). So I'm trying to get everything together in one purchase.
-
The kicker 10" L7's require at least .75cu ft. min in a sealed box, and a max of 1 cu. ft. I don't remember their RMS, but I think it is roughly 600 each. So I'm hoping this will get plenty loud. I'm on a fairly limited budget, so with what I am buying right now, I'm at about $560. I work up at Best Buy, so my discount on them is... decent to say the least. The one thing I want to find is some spools or 4/8/1/0 gage wire. Some if someone can point me somewhere where I can get it cheap then I'll highly appreciate it.
I was considering lifting the seats, but don't want to bring them up too much, also if I buy the wire here local, the cheapest I've found is $160 for 200 ft of 1/0 and $110 for 4 or 8 gauge wire. So if anyone has some cheaper let me know.
-
Best Buy is also picking up polk audio for vehicles.
-
Alright, so I've finally got the cash to toss into my old truck to give it some kick, but I'm not 100% sure what route I want to take. The truck is a 98 chevrolet silverado ext cab. I don't want to pull out the back seat, so I fabricated an enclosure that holds 2 10" subs and gives each .95 cu ft. a piece. I'm pretty set on getting 2 10" kicker l7's and a Kicker zx 1500.1 amp.
Now for the fun questions, I'm wanting to get it as loud as possible, but still retain a nice flush look with the back. So would it be a better route to go with a single 10" L7 ported or just stick with the 2 10s sealed like I planned.
Also, after I upgrade the big 3, should the stock alternator be enough to power this or should I look at getting a more powerful one.
Any tips you can give will be greatly appreciated, here is the truck its all going in to:
This will be my first install, so I hope to do decent on it.
Need some advice on a set up I'm working on
in General Audio - Can't find a category for your question? Ask here.
Posted
Yeah, that's why I'm trying to work as best as I can with what I am provided. So I'm just needing input on different steps I can take with my budget.