[dc lvl 3 18 box?]

whats the average sized box for a lvl 3 and what is a good tuning i was thinking 16-20 cubes at 32hz for 4 any ideas or suggestions?

[DC 8 Vid added page 4]

think these would work as a midbass?

[really need some advice guys!]

graffiti honda onto the side of it... or do a graffiti honda logo on the hood

[Would 2 12s be enough???]

buy them..... i had 2 12" type r on 1500 rms in the yukon and it was louder than expected and you can always add more..

[really need some advice guys!]

graffiti would be tight.

[Sundown SA-15 Pre-Order]

i want these!!!!

[ground pounder non walled..]

i have been trying to build a 2x4 shell to build a 4th order but my talent is up that far....

so until i can afford to pay someone to build it.

the original plan was 32 hfi12d4s in a 4th order designed by 2000lade

im thinking of either doing 16 or 32 in just a normal subs up port back box.

any ideas

[wtb big motor]

couple offers so far just not the right one yet... money in pp in less than 6 hours

[17" rims/tires - $500]

54956 shipped?

[wtb big motor]

my buddy is looking for 2 big motors to make into 18s.

he is just looking for one as of right now.

let me know what you have. paypal will be ready at 8am tomorrow when bank opens to take his check lol

[OCT System of the month VOTE 48 sa 10s]

any new updates? something has to have broke/fallen off by now

[port length help....]

i think im going to use the pvc i have. ill try the 6 6" pvc at the 10.5 and see how i like it.

[port length help....]

not necessarily. if the port area remains the same, then the port length will also be the same.

the length should be right around 7.5" long to get that tuning. tho...that only gives you about 7.5 sq inches of port per foot. kinda low imo. you'd need something like 6 6" aeros at 12.5" long each to get a 35 hz tuning

6 6" aeros seems a little much for 8 12s

[port length help....]

i also have enough 6" pvc if that would work better

[port length help....]

so should i still port on top? drivers also passenger driver or middle?

im looking for just loud nothing meter wise for now.... ill wait for that for when the sa12s come in

[port length help....]

any reason for just doing one???

[port length help....]

no i will be building them out of mdf it will be a rectangle i have room to put 2- 12"x7" ports one in each corner of my wall. i just cant figure out what length and size to make them.

[port length help....]

any help???

[port length help....]

if i have 16 cubes net and have 2 ports that are 6"x10" how long should they be to tune to 35 hz

[Beer for Subs!!!!!!!!!!!! Lmao]

be careful they are probably 15

[ground pounder wall help]

alright i have to run to the walmart and grab some 3" screws and ill throw some pictures up of what i figure out.

[How to build you own aeroports!!]

any pics of them mounted? i have about 80 ft of 6" pvc and planned to do the same thing im just wondering how you mounted them

[ground pounder wall help]

what do you guys think of doing a fiberglass floor? it will keep me from doing weird angles and will give me every inch of possible space?

i was thinking a 2x4 frame on the bottom then staple fleece to the frame and cover in resin? then off the floor id run 2x4s up then do the roof part. i could still put mdf on the side walls back wall and roof just not on the floor then.

tell me do or dont!

[ground pounder wall help]

i found the TylerTrons one but i couldnt find the thread walled vehicles..

i think i need to just build the floor out of the car and then find out how to secure it and make it stay flat.

ill be using 2x4s to build a frame and then add mdf to the inside to smooth out

[ground pounder wall help]

does anyone have pics of how people have built a floor for a wall in a car??? i just made on but its not right.

the last wall i built was easy due to the back of the vehicle being flat. this car has a wicked slope in the back that im trying to make straight. just looking for some ideas.