Bumpin the TWP

ill stick to my MDF then, i have a pretty good design ive been perfecting because the SA-15's that r going in my new build dont come out to late november

yeah i like MDF too but by me the best price is like $37 for a 4'x9' sheet of 3/4 inch

Ask away! people here r always answering questions

Yeah i do all the time in the summer but now thats its getting cold here ive been getting lazy lol

Well goin out to give my breeze her possibly last wash and waxing of the 2010 year. Living here in Michigan you never know today could be the last nice day of the year lol

I'm not sure... i always over power my subs lol

yes use about 2.25 ft^3 per sub with lower levels EDIT: or less

this is the best you'd get idk if the port area is too small tho, 36.75in^2

lol i just designed almost the exact thing on the torres calc. but u beat me to posting it

Birch is expensive lol

I already have the baffle built and its 2.25" thick lol so i got the baffle under control.

are those better than MDF?

ok ill go 3/4" this will save me some money and ill just do a good amount of bracing. thanks

What would be better for 2 Sundown Audio SA-15's. 3/4" MDF is what i want but would 1.5" MDF make it better? Or is 1.5" too much?

I have 2 Pioneer GM-D8500M 1200watt amps, im gonna use 1 on each sub and I have a GM-D9500F 4 channel for my speakers. I might do more idk yet

well do you know where i could get a good one, besides DC and mechman?

haha nope. lol

I know that but im just trying to find a good one for a good price. even though a 1999 plymouth breeze is one of the coolest cars on the road its still hard to find an HO alt to fit it hahaha

I'd say 3500 RMS 4200 Max, this is just an estimate because i still have time before the SA-15 get sent out to figure out what im putting in.

Now that i will be dropping 2 SA-15 sub in my 1999 plymouth breeze (a just for fun build, nothing serious), I probably should up grade my alt because im gonna be running about 4000w total (includes speaker, subs, leds, and maybe HID's, ect.). so my question is what alternator would be good and fit this outcast from the audio world car? I can get one from mechman but its $600 for just a 260 amp alt. so is their any cheaper anyone can find?

Yeahh! thats what im hoping for

theres no room on the sides where the box is designed to be, the port would be completely blocked.

The ports going through the rear deck because i dont have enough room on the front where the subs are to put a large enough port, the car that this is going into is not at all car audio friendly lol

I posted the correct one now http://www.stevemeadedesigns.com/board/topic/89258-new-box-design-for-the-2-sa-15s/

IDK what is thinking lol re-doing at the moment