Jump to content

Bumpin the TWP

Members
  • Posts

    246
  • Joined

  • Last visited

Posts posted by Bumpin the TWP

  1. I use mine to cut 3/4 inch MDF and its a little slow but if you use it right its pretty close to dead on accurate. I used mine to cut all the holes in my system and for other systems too. If you have the money get a larger router if your gonna be doing a lot of 15+ inch holes. Mine did fine with the 6 15 inch holes in my system but it got a little hot and had to take a few breaks.

  2. my car is a 98 neon and has that same engine and has that same problem. i had a cel on though for a misfire ended up being my timing belt was off by one tooth. so check your plugs,wires,plug gap, coil pack then check your timing ill bet urs is off a tooth as well

    as far as switching octanes these engines piss away higher octane fuel they love cheap stuff. ive had bad results with higher end plugs they like cheap plugs,cheap wires, and cheap gas

    Okay thanks for the info man

  3. I have a 1999 Plymouth Breeze 4-cyl. 2.0L. My problem is that my car is supposed to get around 26 city and 28 highway MPG and for the first 9 months i had it i got that. But recently my gas mileage has been lowering majorly. my last take averaged at 17.3 mpg and i have been driving it carefully(kept under 2000 rpm-ish). I have brand new oil in it which is Castrol Edge with Titanium technology, so its pretty much top of the line synthetic oil. The car has 91,XXX miles on it and has been driven by my grandma its whole life till it was given to me, which i also drove it with care. If anyone has any other ideas on how i could fix my gas mileage problem tell me because gas is expensive nowadays and i cant afford it at the moment.

×
×
  • Create New...