Jump to content

michigancapri92

Members
  • Posts

    2197
  • Joined

  • Last visited

Posts posted by michigancapri92

  1. custom 3.8 net cubes with 2x 2.5 round ports at 5 inches long with to SA 12's rear baffle lined with fleece.Decent sq but prefab Q slot port sounded better WTF?

    Ive been told 2 4" aeros is a little under recommended port area . So 2 2.5's is definatley not enough

    Agreed I got 2 4" aeros and it is not enough ... terrible port noise on the super lows .... that's for 2 sa12s plan on re- doing with 2 5" aeros

    I built the box for the e12s and it was good but not the sa haha

  2. Before I ask let me say I know what I'm doing have a dd1 substantial electrical I voltage drop lowest 13.1 on a full tilt don't even drop lower than 12 when car is off until playing for at least 20 minutes .... so that being said ...

    Do you think I could out my 2 sa-12s onto a t2500cp and they can handle it ? Been playing them on my 1500 and let me say it seems like they are laughing at it .... full tilt 2 songs and the cone barely gets warm ..... let me know :-)

  3. the tweeters were a lot bright for me the clarity lacked and any time you put the high pass down low for the 5 1/4 or 6.5 to play a little bass .... cone got hot fast .... was not happy with them ....

    i think it would be a good comp set for someone to run off of HU power of they did not want to get amps

  4. i'd use it for multiple runs from a battery bank to amps, but be careful under the engine. most likely not able to withstand the heat in certain spots. sure it CAN work...but like i said, just be careful with it

    thats what welding cable is for !! it withstands heat ... welding cable is good for +105C ... i use a mapp as tourch to solder lugs onto welding cable and you cant even touch the wire when done but the jacket doesnt even melt !!

×
×
  • Create New...