[i have 0 bass coming from stock door location ... what to do]

ok i have a 6.5 woofer component set in the stock door place and the bass is gone 0 bass no sound .... speaker moves alot so its making the bass but the sound is not there ... its mounted with a spacer i made to go from 5/14 t0 6.5 and i will be remaking that again but could just a bad spacer make all the difference ??? what are some things i can do to get more bass from the stock door locations ?

[how to wire 2 component speakers with built in xover in parallel?]

i know but would i just tap the wire into other one pos to pos neg to neg ?

[would a rockford p1 8" be good midbass door speaker ?]

that would be sweet send me a pm

[would a rockford p1 8" be good midbass door speaker ?]

if you want i can get you a dedicated 6" midbass to go along with your 2 6.5s if you want

how much would 2 custom 8inch 100watts be ?

[would a rockford p1 8" be good midbass door speaker ?]

thanks i think i might actually do 3 6.5 and 2 tweets per door i htink i will be able to get some good mid bass with a 6.5 inch prolly gona do 3x 6.5 comps

how much would the 100WRMS 8inch be ?

[would a rockford p1 8" be good midbass door speaker ?]

would would be a good midbass subwoofer ??? i would like to run 8inch 2x 6.5 and 2x tweeters what would be a good 8 inch speaker ?

[would a rockford p1 8" be good midbass door speaker ?]

exactly what im asking in description ? door panel will have 2x 6.5 orion components and Rockford p1 8" would this make good door panel ?

[how to wire 2 component speakers with built in xover in parallel?]

I have 2 sets of component speakers and the crossover is built into the wire and how would I run then in parallel to an amp both components are 4ohm wand to run 2 components at 2ohm to the amp how would I wire them ??

[my brand new subs wont play]

Use a cordless drill battery

I learned to never use a codless battery drill battery a 9v bayyery is better to test less chance of damage to sub

[Orion Car Speakers]

idk i almost used a 5 channel amp ( got car broken into the day i bought it ... all mounted never wired up) never used em but i would say depends on what you want to run on the mono ... usually 5 channels dont have a very high 5th channel wattage for beefy subs just giving my .02 of what i have seen i am not at all an expert tho

[Orion Car Speakers]

i have a set of orion cobalt series components 50 WRMS at 4 ohms i will be runnign a second set to run on my rockford p400-1 since each channel can support 100WRMS at 2ohms and so far i love them i need to work on the doors because the bass is lacking but overall i have thrown alot at them with no problems

[Boxes]

the box has ports going from top to bottom all 3/4" and then another 3/4" on top covered in vinyl then i have rubber washers on bottom. amp is p300-1 punch and those things i hear are GREAT with cooling.

would that setup be ok when i decide to upgrade to possibly Fi.SSD 10s ?

[Boxes]

I have my subwoofer box and i am using another piece of mdf and rubber spacers to mount amps on top of box would that be ok ?

[is this a good way to wire up my amps and capacitors ??]

i know that but if i was to use them could i just wire the power and ground in parallel to them like the batteries in pic above. BTW i love the picture when i can afford new batt and get more power i will do that.

[is this a good way to wire up my amps and capacitors ??]

how much average is like a 150 amp alt ? and would that be enough power for a 400watt rms 300 watt rms and add little more wiggle room for upgrade later ?

[is this a good way to wire up my amps and capacitors ??]

well i got both caps for 23 dollars new at best buy there are just 1Farad caps no volt meter i already have a battery in the back relocated from the front optima red top and i have been using one and it made a big diff in voltage drop. i did some reading and if i wanted to ad another battery i would have to get another red top and would that put more strain on the charging system than 2x1farad caps ? let me know if it wont hurt my little 70 amp alternator, if i could upgrade the alt i would but no one makes upgraded alts for mercury capri XR2

if i was to get another battery am i correct on it having to be a red top since that is what i use now ? and how would i go about wiring it up next to the stock one ?

[Capacitor wiring burning up?]

you can never go wrong with 4ga wire !! i only have a 400watt rms and 300watt rms amp and i still run 4ga ... never hurts and never have a problem with voltage drop or heat

[is this a good way to wire up my amps and capacitors ??]

Ok so I have two amps and two caps and was wondering if I could wire the caps in parallel grounded to battery and amps grounded to the chassis would this work good or is there a better way ??? Using all 4awg wire and would I need fuse between caps ??

[Android Phones...]

angry birds is a must !!! LOVE THAT GAME !!!!

[good alarm for old car]

ok so i need an alarm system that is pretty basic dont have powr locks dont need remote start just need one that has proximity sensor tilt sensor and glass break sensor and dome light one just need an alarm with the ALARM features no locks or start ect.

[i hate it when people that try to test peoples ignorance ...]

Taylor, Or Mt. Clemens Girbaltar?

If Taylor, look for Mike.

The only white guy selling audio in there. Back against a wall. Can barely fit two people in the booth, rest stuffed with product.

He's still a audio dealer, but more knowledgeable than everyone else in there.

that's who i go to !!! he has the computer on the desk !!! i alway by my wire terminals from him ... seem to be a good price and good quality ... i go to the taylor one. and is rex the one that has the little TV in the stand and he is right by the entrance always tries to throw in a set of tweeters on every deal .... alot of those people i dont like ... soundstation is good i go to them sometimes ... dont trust there work at soundstation II but they sell speaker box carpet so i go to them.

[how to make a portfolio?]

ok so my MECP basic is scedualled for nov 1st ... *nervous ... and i have done a few installs to people and i wana start makign a portfolio to show future employers what i have done to showcase my talent and was wondering what i should put in it ... just the finished product or progress let mek now if anyone else has done this any advice is good advice !!!

[My First Sub Box (With Demo Video)]

Thanks just took my times as best i could with the box measured everything like 10 times lol.GL when you do build yours should turn out nice if i can do it anyone can lol

Thanks yea i am glad it turned out nice and hope it will sound as good as it looks heh.

Another tip i know a lot of people have table saw which would be nice but im not that lucky so i used a circular saw. But the tip that made all the cuts straight was getting a straight edge like a 2x4 and measure from the blade to the edge of the plate on the bottom of the saw and then clamp you 2x4 down and then run the saw along that and the cuts are perfect every time. hope that helps it did for me.

thankfully i have a table saw ... just found out we had one ... been in our garage for 15 years and i had NO IDEA ... LOL think i might buy a circle jig for the router also !!

[i hate it when people that try to test peoples ignorance ...]

i usually go to the guy that has the computer for sale as well ... he has all kinds of wire terminals for good prices ... dont know who the asian guy is ><

[i hate it when people that try to test peoples ignorance ...]

what entrance is he buy and are you talking about the the one in taylor or the other one ?