-
Posts
49 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by MONSONwarrior
-
-
Those amps make great power below .25 as well .... Even the original M3s.
I'd throw another M3a in there if youre wanting numbers though.
It's gonna get replaced with probably a BC5500. I've just got other things to worry about right now. I was testing and I cracked the windshield. Instead of the mirror breaking off it cracked the whole thing, spidered where the mirror meets the glass with a big crack from top to bottom right through the middle of the glass.
-
Well, dropped the M3a to .25 ohm today and she just gets a little protecty on a hot summer day and running full tilt music. but here's the testing results:
147.2 @ 42hz
145.2 @ 32hz
Street Beat 145.1 dropping to 12.1v at the lowest.
So I'm pretty pleased with the increases. And as far as voltage goes, dropping to 12.1v is because in SB you can't rev the engine so that's straight battery power holding it for 30sec. This just kinda shows me I need a bigger amp in the long run because I don't really wanna do .25 all the time, but for now I'm keeping it wired that way and turning down the sub control on the HU until it's comp time.
-
An update on numbers; Did a little testing yesterday and was able to do a 143 average 30sec music run which in my SB2 class for USACi would give me state record so in a couple weeks I'm going to end up driving down to southern WI for a USACi comp.
-
Thanks guys, box is very sturdy and it I love it for daily, but it can't burp worth a shit. I'm doin 142 @ 31hz+ but peaking at 38 and 44 and only doin 146.xx.
Kinda disappointed in numbers because I compete on the side a little. Looks like I'll have to stick with Bass Race and Street Beat. I've got a lot more testing and probably another D3100 to come.
-
-
-
-
-
Over the last month I've been tearing down from my DC XL and building up to my current build. The goal was street beat/bass race but I was hoping for so decent burp numbers. I waited until it was all done to do my build log and forgot some pics along the way but I'll start it with the equipment list.
Pioneer AVIC-U310BT
Eclipse SC6500
Massive Audio NX2
2 Pos & 2 Neg Knu KCA
DB Electrical 250a alt
XS D3100 & D3400
(2) Fi BTL N2 12"
DD M3a
4.4 cubes tuned to 34hz made from birch.
Now to the pictures.
-
3.5 cubes is still too big, try and go around 2cubes...
He's only running 1700 RMS so I'd say do more like 2.5 to around 34hz.
-
I have a DB Electrical alt and it seems to be doing good. At idle I drop to high 13's and cruising doesn't drop below 14.5, but this is with a Deka starting battery and 1500 watts draw.
-
.. I like.. Can't get the measuring tape in there to latch on to anything.
going by that picture you have a tuning of 29hz but 7.57 sq. in. of port area so you've got some crazy port noise goin on.
-
You can use a computer or if you have a video hu I believe you can do it on there. I know Meade has a video on YouTube adjusting the hoe
he has a carputer though so that's why.
-
yup yup or if u have a pc style phone u can do it thru ur phone with BT
I have an Android, would that work?
-
I'm trying to figure out how to adjust it, is it adjusted through a software program and laptop? or how do you do you do that?
-
active means ur going to have to have a sound processor of some sort a rf 360.2 or audison unit just the radio doesnt make it active unlesss u have something like the new pioneer or a alpine 9886 and depending on how you are running your setup ur going to need 1 more amp...
Would I need something like an RF 2sixty.1?
-
I kinda wanna go active for greater control and was thinking I could maybe do it with the AQ4x90, I'm going to be buying a 2200d so it'd be nice to have matching amps. I was looking at all of the controls and it looks possible but would like another opinion. It'll eventually be active on a pair of CDT-61T. The only thing I may have a problem with is my HU is only a 3 band EQ, any thoughts on that? I don't really know all that much about what I need to go active, just how to control the different crossovers.
here's the amp: Audioque: Amps: AQ4X90
here's the speakers: CL-61T - CDT Audio Classic 6.5" 2-Way Component Speakers
here's the HU: Jensen VM9223 DVD receiver at Crutchfield.com
-
then what exactly do you look for?
-
alright thanks man this helps alot! yea the thing behing my seats by the window is the baffle, or its what i call it bc speakers are mounted there.. it flexes like no other.. and how much would all this sound deadner cost?
The general rule is a trunk kit is 20 sq. ft. and that's about eighty bucks. Look at Audio Wrap, you can get 62.5 sq. ft. for just under 200 and it's great stuff. I have about eighty sq. ft. in my car and it works amazing.
-
Under the window line you've got around 9-10 cubes gross. Above probably 15-16.
wall build for a single 18 sub
in Subwoofers / Enclosures
Posted
Why would you wall a single 18? I fit a single 18 under window line with room to spare in the back of my 02 Trailblazer.