Rip Rock
-
Posts
47 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Posts posted by Rip Rock
-
-
Ohhh i dont think we will be testing with 40k on a single sub, no sir. I want to get results over many power levels lets say 500, 1000, 2000, 4000, 8000 watts. Just to watch efficiency and how it compares to the conventional cone at higher levels too.
Anything for you Robby.
Clay knows
-
you run a volt higher because your alt charges much better when its cold. dense air is more so from humidity than temperature.
a cold alt charges better but a hot battery works better.
for me the only thing the heat/cold or elevation affected was my peak frequency. My score stayed the same providing I burped the correct frequency. Luckily in my explorer I was able to make a general graph plotting the temperature inside the cab of my truck vs the peak frequency and had it pretty dialed in.
At one of our big 2x competitions in 2007 i started burping at 9 am to test and get a bassline because I was trying to break 155 for the first time ever by a street vehicle in canada. But as time went on and the hours passed my score kept decreasing....this was with a solid 5-8 min between burps on 25 amp charge so the batts were perfect. Turned out the temperature kept climbing from a cold morning to over 35 degrees (100farenheit) by the time I qualified at around 2pm. And I had my score dialed in at 155.2 but it had gone slowly up one freq at a time from 47 hz all the way to 52 hz and by the time I went to burp I only managed a 154.9 because my peak had gone all the way up to 53 hz obviously.
Running the AC will cool down the interior yes but at the expense of your batt and electrical system. Not worth it IMO. Unless ur an extreme or super street competitor running your own AC unit to control cab temperature. Those guys have their temperatures and frequencies so dialed in its scary! Atleast I know the Riprock twins do...I assume others do aswell
So why doesnt a street vehicle run an a/c unit or heater to fine tune the freq Then get a heat gun and warm up the batt. Should yeld more conistant tests to dial in the set up
-
Are you serious!?
Find out for sure, I might be able to lend a hand
He made it home today. Clay took out the thermastat because it was overheating a bit. But the engine might be shot in it,
he was saying theres no power.
-
do you have video of the 179 Extreme 2 run?
I seen the 160.5 and that was insane
I`m not sure if anybody got our run. We will have too record the next one comming up.
-
ok, he will put up another 1 on sept 13th then. Always haters, never players right?http://www.termpro.com/asp/lb.asp?ListMeth...ionID=915739522
not a certified score...very strong score ...either way ..
-
Clays ride was loud! hmm, was he holding back?THANK YOU!!!
-
This sunday should be fun Clay, time to check out your new rubber and install, oh and your 10 dbzz lolDid you use the F-C II tire? These are 11 pounds lighter then the old tires i had on, and 10x quieter on the road. So far seem to work real well in mud for a all terrain.
And RipRock knows the truth. haha
-
#1 fan boy is correcthaha ya it was all for a good laugh. I think the sidewalls are kick ass though. But seriously i did buy these for my truck and seriously my rims are smaller but my truck is louder.
-
haha this was because of my thread wasnt it boon?
well my take on this is simple. i hear no change in my car hot or cold. so i have to rely on science.
hot air is better acoustically for decbels but worse for electrical strains
Temp is very tricky to mantaine in certian type installs. we plot or temp 3 times a year. it also depends what temp will be the loudest when you cold tune or hot tune your install. in SS classes and in some street classes the temp can play a role. Happy testing!
-
you just need the plastic interior panel right? what year ? ex cab, crew cab? interior color? options?
pritty much the whole panel. the insert above the arm rest and near the pocket on the bottem of the door. so 2 spots on the door. more porblems now. lol. just about got hit by lightning on friday (about 20ft away) and it took out 20 grand of sutff in the house. ahh it keeps getting better.
-
lol denying you did not do it does not mean that you did not do it. I would call up the manager.
I know, the worst part is that i talked to the owner and the manager!! He just basicly said not there fault or problem. I told him crossfield is a small town and I will do anything tell other people about this and not to shop there, before i told both of them off.
-
x2
are you talking about a new door skin? , or the actual inside door panel?
So heres the scoop. As some know we got a flat tire last weekend on our trailer. So we book a time to bring the trailer in, since we already had the trailer hooked up we towed it over to kal tire in Crossfield ab. This was on wed. the 30th btw. After work we picked up our truck and trailer and start driving, then I smell batterie acid, and decide to pull over. After futher looking in the truck there is 2 spots on the door pannel that look like something ate it or melted it. After taking the drivers side door pannel off and seeing no wires there, i call them up and say my door pannel is screwed from you guys. They say (kal tire) to bring it in and the will have a look. So we get there today and they say they didnt do it, our fault, bla bla bla. I told them I work with wood and steel all day then I also said you guys sell batteries here as well as calcium filled tires wich all have acid that can do this, to a plastic door in my gm truck. There responce was, they didnt do any of those tires today or install any batteries.
So i just got bent over just like that. Inner pannel thats screwed.
-
they might be brighter than stock but all the aftermarket projectors i have seen the width and distance forward sucks. also the have crazy hotspots. I have infiniti projectors on my car and i can see into both sides of the woods and they light up atleast 75 yards infront.
good info guys! well i like the looks of projectors, mabye some hids in the projectors will help. i hate have the same truck as the rest, a pet peve.
But it looks like it will have to wait for a bit. a tire company was changing the tires on the trailer and they got some sort of acid on the drivers door panel. yea go figure, so it looks like i'm out $680 to replace the door panel :censored:
-
thanks guys. i know that they are different part #'s from gmc. i have seen some with some in there, just wanted to double check before i order a set and find out that is was a waste of money. lol i did the google and ebay thing btw never herts to ask others:D
-
i know you watch family guy
You bet!
-
What the deuce? No one on here knows?
-
Looking for some projector headlights for a 2005 Sierra GMC 2500HD. Now I was told that the headlights are the same as a GMC Denali of the same year. I know that the bumper lights are different. Is there any truth to this? if there is there is some better options for me. any info would help out the cause.
-
Man you guys made it look easy. It was really cool to me you guys and get a chance to see a world class truck like yours. Like I said when I met you guys in San Mateo, You know more bout this SPL game then I'll ever learn.
Hope to see you guys next year.
Bill
Thanks Bill. You seemed to know quite abit yourself about spl!!
-
wasssssssssssup Rip Rock!! Nice meetin you guys
You too!!
Your vechicle and install looks more impressive up close than on the net!! Props Steve!!
-
rip rock showed up from canada. what did they hit?
We hit a 176.0db to win nationals and got owned in the worlds to Mikko, came in second. The funny thing is that a week before we weren`t even going to go because of our #`s at home were low. 3 dashes and 2 center councils later we loaded it up and said it`s going to hit what it hit`s, we will just bring it and get 3rd, haha and we won lol. After 7 years all of our hard work payed off for us. It was nice to see Rusty and Ana do good aswell. After last years heartbreak for them it was good to see them take nationals too in street A.
-
Thanks for supporting DB Drag! The booth looked good and the product was good! impressed by your batt! Thanks DC Audio.
-
Check the classified section on TP http://www.termpro.com/Classifieds/XcCPViewInCat.asp?ID=12 you can pick one up for cheep there. The .net versions are more accurate than the usb versions as well. but for what you need pick up the usb version.
Lexus IS-F Sound System install - Custom SMD VM-1/OM-1/TM-1f Dash Piece (update page 71)
in Just Meade....my projects - Tons of SMD Builds here!
Posted
Just was browsing through this forum. Your car turned out great. Nice job.